1994-1997 Honda Accord Ignition Switch & Lock Cylinder Assembly with Key for Models with Automatic Transmission

This part replaces:


  • New

This is the ignition switch assembly with lock cylinder that mounts inside the steering column.

  • Common Problems
  • Damaged during a theft attempt
  • No start condition occur because the junction block contacts corrode and short out.
  • No start condition because the contacts in the rotating upper assembly wear out
  • While Driving your gauges and dash lights flicker as if the vehicle shuts off for a brief second

If your vehicle is having issues when starting such as the power comes on in the car when you turn the key on but then the engine does not turn over or if accessories don't seem to work and you've checked things like the battery and fuses this part may be your problem. If your contacts are corroded you can clean them but once the protective coating is gone then they will most likely corrode again quicker and possibly short out. If you are having problems with this part then fix it right the first time.

  • Mounts inside the steering column and connects to the main harness, When the key cylinder is turned, it turns the switch on this harness that sends the electrical single to start the vehicle
  • Controls the key alarm
  • Replaces dealer part numbers: 35100-SV4-A02, 35100SV4A02
  • Exact fit
  • No cutting or splicing necessary
  • Dual plugs
  • (2) Keys included!
  • Fits all tilt and non tilt columns
  • Only fits models with AT (Automatic Transmission)

These are electrical parts and are all tested before they leave our warehouse.

This electrical item is not returnable, it is only eligible for exchange.

Lifetime Warranty

Effective June 23, 2014: This item is backed by a manufacturer's Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Disconnect your negative battery cable.
    • Use your 8 mm wrench.
  2. Remove the steering column cover
    • Remove 3 screws from the bottom to remove your steering column cover.
    • Use your Phillips screwdriver.
    • Pry apart the steering column cover once you have removed the screws.
    • Pull off the lower cover panel.
  3. Remove the ignition switch
    • Remove the two 8 mm bolts securing the ignition switch.
    • Unplug the ignition harness.
    • Watch the video and use the replacement ignition harness cables for visual reference to identify the correct connections.
  4. Install the new ignition switch assembly
    • Plug the wiring harness back in.
    • Bolt the ignition switch back in using your 8 mm wrench.
    • Replace the steering column cover and screw back in with your Phillips screwdriver.
    • Clip the lower cover panel back on.

How-to Video:

(10:31 min)

Tools List:

    Screwdrivers & Related

  • Phillips Head Screwdriver

  • Wrenches - Metric

  • 8mm Wrench

This part replaces:


Vehicle Fit

  • 1997 Acura CL Ignition Switch & Lock Cylinder Assembly with Key for Models with Automatic Transmission
  • 1994-1997 Honda Accord Ignition Switch & Lock Cylinder Assembly with Key for Models with Automatic Transmission
Part #: 1AZIS00011

- Ships Same Day for orders placed by 5 P.M. ET


Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!


hablamos Español:866-401-3393
For Orders Placed By 5pm Est