Replaces

1992-2003 Ford Taurus (excluding SHO Models) A/C Bypass Pulley for V6 3.0L

This part replaces:

  • DORMAN 34166

  • New

This Bypass pulley bolts on to your engine in the same location as your malfunctioning Air Conditioning compressor, allowing you to use your original serpentine belt. A malfunctioning compressor can be noisy and cause premature damage to your serpentine belt. This is a cost effective alternative to costly repairs to your Air conditioning system.

Features:

  • Built to strict quality control standards
  • Includes bracket, highest quality bearing, and correct size pulley
  • Fits perfectly in the place of an A/C compressor.
  • Allows you to use your original serpentine belt
  • Fits 3.0L V6 engines excluding SHO models with the Yamaha Engine

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Step 1: Evacuate your A/C system (3:15 in the video)
  2. Step 2: Disconnect the battery (1:48 in the video)
    • Use your 8mm socket
  3. Step 3: Loosen and remove the serpentine belt (1:53 in the video)
    • Use your 15mm wrench and an extra piece of pipe.
    • Apply it to the belt tensioner and turn it clock wise.
    • Remove the serpentine belt.
  4. Step 4: Access the compressor (2:38 in the video)
    • Move the fuse box out of the way by pulling on the tabs and lifting it up and to the side.
    • Remove the radiator fan
    • Unplug it and pull out the pins from the fan shroud.
    • Repeat for the second fan.
  5. Step 5: Remove the A/C compressor (6:03 in the video)
    • Remove the mounting bolts on the A/C compressor
    • Pull the A/C compressor out
  6. Step 6: Install the bypass pulley (7:49 in the video)
    • Place it where the compressor was mounted and bolt it in.
    • Put a bushing on with each bolt.
    • The bypass pulley installs with 3 bolts rather than 4 like the compressor.
    • Use wire ties to secure the harnesses and tidy everything up.
  7. Step 7: Reassemble and finish up (10:09 in the video)
    • Replace the fans
    • Put the fuse box back where it lives.
    • Use your diagram to put the serpentine belt back on.
    • Check the belt and all the pulleys for any damage.
    • Reconnect the battery

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 13mm Socket
  • 15mm Socket
  • 8mm Socket

How-to Video:

(12:38 min)

Tools List:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 13mm Socket
  • 15mm Socket
  • 8mm Socket



This part replaces:

  • DORMAN 34166

Vehicle Fit

  • 1992-2003 Ford Taurus (excluding SHO Models) A/C Bypass Pulley for V6 3.0L
  • 1995-1998 Ford Windstar A/C Bypass Pulley for V6 3.0L
  • 1995-2002 Lincoln Continental A/C Bypass Pulley for V6 3.0L
  • 1992-2003 Mercury Sable A/C Bypass Pulley for V6 3.0L
$45.45
Only 5 left in stock
Part #: 1AEPM00006

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est