Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Part Details
TRQ side mirrors and mirror components are designed to match the function, fixture, and performance of the original version for easy installation. TRQ mirrors are DOT certified, comply with all federal safety standards, and are independently lab tested to ensure our products comply with all government regulations. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
Exact fit - To obtain proper fit and function confirm your vehicle has the exact mirror options listed.
Paint To Match Note:
"Paint-to-match finish" refers to a smooth, paintable surface. This item is not painted. Paint offers better coverage and adhesion, but it is not necessary for installation.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the side mirror on this 2008 Dodge Caliper. We show you on the driver's side, but it's the same procedure on the passanger's side. The items you'll need are new side mirrors from 1AAuto.com, an 8mm socket, a ratchet with an extension, and a flat blade screw driver.
First, pry off this triangular panel on top of your door panel. Then this small panel right here. Holding in your mirror there's three 8mm nuts. There's one there, one right here, and one right up in there. To make it easier to get to, just disconnect this harness. Just push on the tab at the top and pull it free. We'll fast-forward as Don removes those three 8mm nuts. Once those nuts are removed, you can just pull the mirror straight out. Just pull your harness through the door.
The one the right is the original mirror; the one on the left is the new mirror from 1A Auto. You can see they will mount, connect, and work exactly the same. Take your new mirror and feed the harness through the door. Then line up the studs on the mirror and push them into place. Then replace those three 8mm nuts. We'll just fast-forward as Don does this and tightens each of those up. Reconnect your harness, and make sure you tuck those wires down inside the door panel. Then line up your triangular panel and push it into place. Then replace that smaller panel below that.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
