2007-2011 Jeep Wrangler Water Pump for V6 3.8L ( Mopar)MPEWP00001
This part replaces:
- Mopar 4666044BA
- Hollander 324-00125
- OE # 4666044BA
- OE # 4666044AA
MOPAR WATER PUMP: 4666044BA
This water pump is a genuine Mopar replacement part! It is the very same part you would receive if purchased from your local Jeep dealer!
- Brand New Mopar Water Pump
- Not remanufactured
- Replaces dealer part numbers: 4666044AA, 4666044BA
- Built to strict quality control standards
- No core charge
Your water pump is a major component of your engine cooling system. If the water pump fails, the engine will overheat causing it to shut down. Water pumps have an indicator that tells you when they are going bad. There is a small hole in the water pump right under the shaft in the middle that the pulley bolts to. As the water pump's bearings wear out coolant seeps by them and leaks through this hole. If you notice a few drops of coolant under the front of your engine this is an indicator your pump is failing. If a water pump fails it will cause engine overheating, and possibly further engine damage. If you have noticed little drops of coolant under the front of your vehicle then inspect the bottom of the water pump to see if it is dripping out of the indicator hole. If your water pump is the problem, then this part is for you. Replace your broken or leaking water pump now with this great fitting replacement part.
This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.
- 2007-2011 Jeep Wrangler Water Pump for V6 3.8L ( Mopar)
Part #: MPEWP00001
Ships Same Day for orders placed by 5 P.M. ET
Free GROUND SHIPPINGCheck Shipping Rates
Brand #: 4666044BA
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."- Dwuan M.