Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Left Hand Drive:
All of our auto parts are intended for Left Hand Drive USDM vehicles. If your vehicle is Right Hand Drive, please ensure the part is correct for your specific vehicle.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Hi. I'm Mike from 1AAuto. We've been selling auto parts for over 30 years!
We need to remove this lower dash trim to get to the blower motor. It's clipped into place with three push clips. I'm just going to take my fingers, pop that one out, pop this one out in the middle here, and that one popped out, too. Three clips. It’s got two little rubber bushings that sit in the back here. We can just lay that down. Actually, I'll take it out of the way.
The blower motor sits right here. I’m going to unplug it. The three screws that are holding this blower motor in place are T20 torx. If you don't have the T20 torx, these also have a flat head slot cut into them, so you could use a flathead screwdriver. I'm going to use the T20 torx because it's a little easier. It doesn't slip out. Remove the three screws. Hold the blower motor, because once I do this one, it's going to want to fall out. Slide it right out of the heater box.
This is our original from our vehicle and a brand new one from 1AAuto.com. See it has the identical mounting holes, same style, and same size fan blades, so this should fit in place and work great for us.
We take our new one and line up this, the opening in the heater box. Slide it in place. Get one of these screws caught. These are just going into plastic, so once I feel them get tight, I'm just going to stop. Get this other screw installed. Install the final screw and plug it back in.
Now, reinstall this lower cover. These two rubber pieces are going to go into these openings here. We're going to push this up and the clips here and here, we're going to snap up into place.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Tools used
