Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto 1 Year Warranty
Frequently bought together
Part Details
Genuine original equipment part (OEM) that was factory installed on your vehicle by the manufacturer.
Item Condition:
New
1 Year Warranty
This item is backed by our 1-year warranty. In the event this item should fail during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
If your sun visor is busted and you want to replace it, or like this one that's pretty scuffed up, you can just fold it down. Take a plastic trim tool—we need to remove this cover off of here—and just kind of put the trim tool in here and pop it out and down. Do the same. Kind of push this off of here. I'll put that aside to reuse it.
These screws here are a T25, or they also are slotted for a flat head screwdriver. Put that aside, pop this out, and move this over. Now we'll get the other one. You might have to hold the visor as you loosen in. And there's a little hook in there. Slide it right out.
Here's our old visor. So here's our old visor from our vehicle. It's a little faded and beat up. And a brand new one from 1AAuto.com. The original's got the mirror, and the new one's got a mirror too. Same style mount. Same warning labels. This should fit great and work great in our vehicle.
So I just had to adjust this, just make sure it lines up. These two screw holes are on the inside. So that we can actually go in here. Actually, I can turn this. It's a little tricky, and a little hard to turn. I don't have the leverage of it being in the roof. You can also clip it in here. Install one of the screws. Unclip that. Make sure the holes lined up. Get that screw started, and then tighten it up. Clips into place, works the same. We'll reinstall our trim cover. Just kind of slips over this. Pushes right back up in to place.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
