Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Part Details
NOTE: It is necessary to reuse your original hardware, as new hardware is not included with this item.
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Item Condition:
New
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
So, it's time to get this old grille off of here. You're going to notice you have couple push clips. You have one over here and one located on the other side of the vehicle, in the same area. And you're also going to have a 10-millimeter-headed bolt right here. And then, of course, one over there as well.
We can start with...however you want. I'm going to go with the bolts. Use my pocket screwdriver. You should be able to pull up on the center of these. Sometimes they get stuck. Lift it right up and out. Should look like that.
Now that we have those out, you should be able to move this around a little bit. At this point, we're just going to lift straight up. If you were to look at these clips, you're going to see a little tab right where my pocket screwdriver is. You need to push in on that and then you should be able to draw this clip down by pressing. And that's going to help unlock it for you. Remove that.
Now it's time to get the badge off of here. To do that, you would just turn it over and you can see these little ears. You have one here and one there. You're going to push those. Once you do that, we're going to draw it away. This is just going to come scooping out. You can use a pocket screwdriver or your thumbs or whatever you can do. Just kind of press, press, lift. There it is.
It's time to get the badge on this one. Start with the lower part, right in there and then roll the top in. Give it a nice tug. That feels great.
Now, it's time to get the grille on here. Pay special attention to this area. That's where the piton on the bottom of the grille is going to slide in to. Come right up and over it. And we're going to pay attention to those side pieces. You want to line them up and then press the grille down. There it is. That one clipped in. Do the same to the other side. Once that's in, you're going to grab your little push pin and connect these two pieces together. Let's grab those last couple bolts. This looks great.
