Replaces

2005-2006 Toyota Camry Fog / Driving Light Pair

Part Details

  • Quantity: Pair

  • New

This pair of fog driving lights is just what you need to get your vehicle in good looking form again!

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side)
  • Bumper Mounted
  • Injection molded plastic
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement fog lights
  • Fog lights do not include bulbs or wiring

This pair of fog driving lamps is a great replacement and has good cost savings over a fog light from the dealer.

 

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. Servicing the Fog Light Bulbs (0:42 in the video)
    • Remove the four 10mm bolts from the splash shield
    • Pull the splash shield aside
    • Twist the bulb socket counterclockwise out of the light
    • Disconnect the wiring harness from the fog light bulb
    • Connect the wiring harness to the new fog light bulb
    • Twist the bulb clockwise into the light
  2. Removing the Fog Light (1:37 in the video)
    • Remove the two 10mm bolts from the fog light
    • Disconnect the fog light wiring harness
    • Pull out the fog light
  3. Installing the Fog Light (1:46 in the video)
    • Lift the fog light into place
    • If the mounting points have been broken, mark the mounting area with an awl
    • Pull down the fog light
    • Make new mounting holes with a 1/4" drill bit and drill
    • Lift the fog light into place
    • Insert two bolts into the fog light
    • Connect the fog light wiring harness
    • Push the splash shield into place
    • Insert the four 10mm bolts into the splash shield

Tools needed for replacement:

    Drills, Drill Bits & Related

  • 1/4 Inch Drill Bit
  • Drill

  • Materials, Fluids, and Supplies

  • Coarse Threaded Bolts (to replace rivets)

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Bent Tipped Awl
  • Flashlight

How-to Video:

(06:47 min)

Tools List:

    Drills, Drill Bits & Related

  • 1/4 Inch Drill Bit
  • Drill

  • Materials, Fluids, and Supplies

  • Coarse Threaded Bolts (to replace rivets)

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Bent Tipped Awl
  • Flashlight




Vehicle Fit

  • 2005-2006 Toyota Camry Fog / Driving Light Pair
$142.95
Save 52%
List: $297.95 Save: $155.00
Only 2 left in stock
Part #: 1ALFP00102

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est