Replaces
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Acrylonitrile, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the power mirror switch on this 2006 Jeep Liberty. It's the same part and process on these vehicles from 2004 to 2007. The items you'll need for this include a new power mirror switch from 1AAuto.com, a flat blade screwdriver, and a Phillips screwdriver.
Start off by prying out this little panel behind your door handle. Now remove this Phillips screw and this one down in your pull cup. We'll just fast-forward as Don does this. Now pull out around the door panel to release the clips. When you get to the top, pry the door panel out. Once the clip pops free, pull the door panel up and off.
On the back of your door panel, you want to release the clip on your door handle rod and pull the door handle rod down and out. Then you want to push the tabs on both harnesses and release them. Using your flat blade screwdriver, just pry out the tabs on either side of the switch, and it pops right out.
On the left is the old power mirror switch; on the right is the new one from 1A Auto. You can see they're identical, and will mount exactly the same. Just push your new one into place.
Now, to replace your door panel, push the harnesses back into place. Push the door handle rod back into place and re-clip it. Then line your door panel up and push it down onto the windowsill and over that lock. Now make sure your clips are lined up and hit them in around the door panel. We'll just fast-forward here as Don replaces those two Phillips screws and replaces that little panel behind the door handle.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
