2003-2011 Ford Crown Victoria Front & Rear Shock Absorber (Set of 4) (excluding Police Package)1ASSP00401-689912
- Front / Rear Location: Front
- Front / Rear Location: Rear
- Quantity: Set of 4
These replacement shock absorbers are just what you need to get your vehicle in good working order again.
- Comes as a SET of 4
- Fits both LH (Driver Side) & RH (Passenger Side) FRONT & REAR
- Each FRONT Shock & Spring Assembly includes:
- Upper Mount
- Upper Spring Isolator
- Upper Spring Seat
- Boot Kit
- Lower Spring Isolator
- REAR Shock Absorbers are Monroe Brand Sensa-Trac
- Direct replacements
- Built to strict quality control standards
- Do NOT fit Commercial Chassis, Limousine, or Police Package Models
We recommend replacing struts/absorbers in pairs and performing an alignment after replacement.
In the past, replacing shocks required specialized tools to compress, remove and transfer the spring. This new shock and spring assembly makes this job much simpler for the do it yourself mechanic. This part comes pre-assembled. Jack up and support the vehicle with jack stands. Remove the wheel. Unbolt the top mounts and the bottom from the suspension and replace the whole unit. The large bottom bolts usually require an impact wrench and socket for removal. When reassembling, be sure to torque all nuts and bolts to their proper specifications. Do not use impact tools when reassembling.
This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.
- 2003-2011 Ford Crown Victoria Front & Rear Shock Absorber (Set of 4) (excluding Police Package)
- 2003-2011 Lincoln Town Car Front & Rear Shock Absorber (Set of 4) ( Excluding Limousine)
- 2003-2011 Mercury Grand Marquis Front & Rear Shock Absorber (Set of 4)