Replaces
This part doesn’t fit a . Select from parts that fit.
Light Assembly Lifetime Warranty
Frequently bought together
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
The bulbs are for testing and not covered under our warranty. Our warranty applies to the light assembly only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com , your source for quality replacement parts, and the best service on the internet.
In this video we're going to show you how to remove and replace the taillight on this '06 Murano. The only tool you'll need is a 10mm socket with a ratchet and extension. This is the same procedure for the '03 to '05, and we do show you how to service the bulbs on those years.
The plastic trim panel here pulls off. You just have to pull the pins. You have a 10mm bolt down at the bottom, and one at the top. Fast forward through this as I'm just removing those bolts with a 10mm socket and a ratchet and extension. There's two pins now that hold it. One at the top. If you pull there. Pull it out. See the plug here, pull that from the body, and pull the harness out. There's a little connector here. You need to press on that tab, and disconnect it.
So this light is an '06 and '07. It's the LED style. If you have an '03 to '05, you'll have just the regular bulbs. They pull out by turning counterclockwise, bulbs pull out. That's how they replace. And this light, you might be able to see here, this clip came out. Pry it off, and it goes right back into the body of the car. Plug that in, push it down in. Put it into place. You can kind of see from up here where that pin goes in. This one down here. Clicks into place. Start our bolt here, and start our bolt up here.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts, and the best service on the internet. Please feel free to call us toll free 888-844-3393. We're the company that's here for you on the internet, and in person.
