Replaces
Part Details
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet. Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video we're going to show you how to replace the tailgate handle on this 2006 Jeep Liberty, and it's the same part and process on these Liberties from 2002 to 2007. The items you'll need for this is a new tailgate handle from 1AAuto.com, a 10 mm socket and ratchet, a flat blade screwdriver or a pick, a T30 Torx bit, and a pair of pliers. First we have to remove the interior tailgate panel. Just pull out along the edges to release the clips. Once all the clips have been released you can lift the panel up and off. If a clips stay behind, use pliers to pry it out, and then it just slides right back into the panel. Now pull back your water shield. Right here is your door handle rod. Using a pick or a flat blade screwdriver, pry that clip up and off the rod, and then pull the rod out of that hole.
Right here there's a 10 mm bolt, and another one right here, and we'll just fast forward as Don removes those. Next, remove these two T30 Torx bolts. Now pull the handle out and off. On the back here you just want to pry this metal clip off, and then pry out this switch. Next, you have to transfer this bracket over to your new tailgate handle. Just remove the two T30 bolts that hold it into place. Put the bracket into place on your new handle and replace those two T30 bolts. Push the switch into place, and that metal clip that secures it. Pull the door handle back and fit it back inside the tailgate, and then replace those two 10mm bolts and those two T30 bolts. Next, put the door handle rod back into that hole, and push the clip back down onto the rod. Replace your water shield, and push your tailgate door panel back into place, and just hit each of those clips back in, and then you're all set.
We hope this video helps you out. Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free: 888-844-3393. We're the company that here for you on the internet and in person.
