Replaces

2002-2007 Jeep Liberty Exterior Door Handle Front Driver Side

Part Details

  • Location: Front
  • Location: Driver Side

This part replaces:

  • OE # 55360333AB, 55360333AF
  • DORMAN 79392

  • New

This replacement door handle is just what you need to get your vehicle in good looking form again!

Specifications:

  • LH (Driver Side) FRONT
  • Smooth black handle with keyhole
  • Replaces dealer part number: 55360333AB, 55360333AF
  • Direct replacement for original handle
  • Built to strict quality control standards

This door handle is a great replacement and has substantial cost savings over the dealer unit.

Lifetime Warranty

Effective June 23, 2014: This item is backed by a manufacturer's Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Remove the door panel
    • Pry up the little access panel behind the inside door handle.
    • Remove the Phillips screw exposed, as well as the one in the door pull.
    • Pull the door panel firmly to unpin the door panel.
    • Disconnect the door latch rod and the wiring harnesses.
  2. Remove the outside door handle
    • Remove the speaker by removing the three Phillips screws and pulling the speaker out and disconnecting the lead.
    • Carefully peel back the water shield.
    • Unclip the door latch and rods from the door handle mechanism.
    • Remove the two 10 mm nuts securing the outside door handle using your socket and ratchet.
    • Using your T30 Torx driver remove the two bolts on the side of the door.
    • Remove the two T20 and one T30 bolt mounting the door lock mechanism from the door handle.
  3. Install the new outside door handle
    • Install the lock mechanism into the new door handle, and secure it with the three Torx bolts.
    • Mount the exterior door panel.
    • Replace the two T30 bolts and connect the door latch and lock rods.
    • Bolt in the door handle with your 10 mm socket and ratchet.
    • Replace the water shield.
    • Connect the speaker lead and secure the speaker with the three Phillips screws.
  4. install the door panel
    • Connect the wiring harness leads and the door latch cable.
    • Clip the door panel in.
    • Secure with the two Phillips screws.
    • Clip the access panel back in behind the inside door handle.

How-to Video:

(07:05 min)

Tools List:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Torx Drivers & Sockets

  • T20 Torx Driver
  • T30 Torx Driver



This part replaces:

  • OE # 55360333AB, 55360333AF
  • DORMAN 79392

Vehicle Fit

  • 2002-2007 Jeep Liberty Exterior Door Handle Front Driver Side
$55.45
Save 41%
List: $94.70 Save: $39.25
Part #: 1ADHE00541

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est