Replaces

2002-2006 Nissan Altima Front Strut Assembly for V6 3.5L Passenger Side (Monroe Quick-Strut)

Part Details

  • Front / Rear Location: Front

This part replaces:

  • Monroe 171426
  • HOLLANDER 527-59926R
  • HOLLANDER 527-59928R

  • New

Monroe Quick-Strut® 171426

This is a new MONROE strut and spring assembly. We recommend replacing struts in pairs and performing an alignment after replacement.

Specifications:

  • Quantity: (1) Quick Strut

  • Side: RH (Passenger Side)

  • Location: FRONT

  • Vehicle Type: All

  • Engine SizeV6 3.5L

Quick and easy... remove and replace one piece! No need to take apart entire assembly. No need to compress coil springs. Do the complete job right the first time. Enhances the handling, safety and performance of your vehicle.

Includes the following preassembled components :

  1. Upper Mount
  2. Upper Spring Isolator
  3. Upper Spring Seat
  4. Boot Kit
  5. Lower Spring Isolator
  6. Premium Strut

The revolutionary Monroe Quick-Strut unit is the first complete, ready-to-install replacement strut assembly available! Monroe Quick-Strut units include all the components required for strut replacement in a single, fully-assembled unit. They feature pre-assembled replacement upper mount, upper and lower spring isolators, upper spring seat, coil spring, boot kit, and a premium strut. This breakthrough design saves on installation time by eliminating having to disassemble components and compress the coil spring prior to installation. Each Quick-Strut assembly features application-engineered valving to optimize each vehicle's unique ride and handling characteristics.

In the past, replacing struts required specialized tools to compress, remove and transfer the spring. Our new strut and spring assemblies make this job much simpler for the do it yourself mechanic. This part comes pre-assembled. Jack up and support the vehicle with jack stands. Remove the wheel. Unbolt the top mounts and the bottom from the suspension and replace the whole unit. The large bottom bolts usually require an impact wrench and socket for removal. When reassembling, be sure to torque all nuts and bolts to their proper specifications. Do not use impact tools when reassembling.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Warranty Note: Tenneco Inc. warrants qualifying Monroe® products against defects and wear-out when used on private passenger cars and light trucks under normal operating conditions for as long as such original purchaser owns the vehicle on which they were originally installed.

Tenneco's obligation under this warranty is limited to replacement of the worn-out or defective product in accordance with this warranty. Cost of removal and installation are not included, and any incidental and consequential damages are excluded under this warranty, regardless of when the failure occurs. This warranty has no cash value. This warranty does not apply to products which have been modified, improperly applied or installed on vehicles used for commercial or racing purposes. Qualifying Products are Monroe OESpectrum Shocks and Struts, Monroe Reflex Shocks and Struts, Monroe Sensa-Trac Shocks and Struts, Monroe Quick-Strut replacement assemblies, Monroe Gas-Magnum Shocks

Quickly and easy... remove and replace one piece! No need to take apart entire assembly. No need to compress coil springs. Do the complete job right the first time. Enhances the handling, safety and performance of your vehicle.

Includes the following preassembled components :

  • Bearing Plate
  • Upper Spring Isolator
  • Upper Spring Seat
  • Coil Spring
  • Boot Kit
  • Lower Spring Isolator
  • Premium Strut

The revolutionary Monroe Quick-Strut comes with a Limited Lifetime Warranty* and is the first complete, ready-to-install replacement strut assembly available! Monroe Quick-Strut units include all the components required for strut replacement in a single, fully-assembled unit. They feature pre-assembled replacement bearing plate, upper and lower spring isolators, upper spring seat, coil spring, boot kit, and a premium strut. This breakthrough design saves on installation time by eliminating having to disassemble components and compress the coil spring prior to installation. Each Quick-Strut assembly features application-engineered valving to optimize each vehicle's unique ride and handling characteristics.

In the past, replacing struts required specialized tools to compress, remove and transfer the spring. Our new strut and spring assemblies make this job much simpler for the do it yourself mechanic. This part comes pre-assembled. Jack up and support the vehicle with jack stands. Remove the wheel. Unbolt the top mounts and the bottom from the suspension and replace the whole unit. The large bottom bolts usually require an impact wrench and socket for removal. When reassembling, be sure to torque all nuts and bolts to their proper specifications. Do not use impact tools when reassembling.

Note: Tenneco Inc. warrants qualifying Monroe® products against defects and wear-out when used on private passenger cars and light trucks under normal operating conditions for as long as such original purchaser owns the vehicle on which they were originally installed. Tenneco's obligation under this warranty is limited to replacement of the worn-out or defective product in accordance with this warranty. Cost of removal and installation are not included, and any incidental and consequential damages are excluded under this warranty, regardless of when the failure occurs. This warranty has no cash value. This warranty does not apply to products which have been modified, improperly applied or installed on vehicles used for commercial or racing purposes.

  1. Removing the Strut (0:39)
    • Raise and secure the vehicle
    • Apply penetrating oil to the two 12mm bolts
    • Remove the two 12mm nuts from the top of the strut
    • Remove the 18mm bolt from the bottom of the strut
    • Pry the strut up and off its mounting with a pry bar
    • Pull out the strut and the rubber cap
  2. Preparing the New Strut (2:14)
    • Put the old strut in a vise
    • Remove the 14mm nut from the top of the strut
    • Pull off the outer part of the strut
    • Slide the outer part of the strut onto the new strut
    • Put the new strut into a vise
    • Tighten the 14mm nut onto the new strut
  3. Installing the New Strut (3:24)
    • Put the rubber cap on top of the new strut
    • Slide the new strut into place
    • Line up the new strut onto its studs
    • Insert the 12mm nuts onto the strut
    • Push the bottom of the strut into place with a hammer and a pry bar
    • Insert the 18mm bolt into the bottom of the strut

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 12mm Socket
  • 18mm Socket

  • Wrenches - Metric

  • 14mm Wrench

How-to Video:

(04:55 min)

Tools List:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 12mm Socket
  • 18mm Socket

  • Wrenches - Metric

  • 14mm Wrench



This part replaces:

  • Monroe 171426
  • HOLLANDER 527-59926R
  • HOLLANDER 527-59928R

Vehicle Fit

  • 2002-2006 Nissan Altima Front Strut Assembly for V6 3.5L Passenger Side (Monroe Quick-Strut)
$174.95
Only 4 left in stock
Part #: MNSTS00134

Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates
MONROE
Brand #: 171426

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est