Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Part Details
Our direct fit gas-charged strut assemblies help to restore your vehicle’s handling and ride quality to just like new.
Our direct fit gas-charged shock absorbers help restore your vehicle's handling and ride quality to just like new.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best servise on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video we're going to show you how to replace the rear struts on this 2003 Nissan Altima. The items you'll need for this are new rear struts from 1A Auto.com, 12 millimeter and 18 millimeter sockets and a ratchet with an extension, 14 millimeter wrench, a vise, a pair of vise grips, pry bar, and a hammer.
Start off by just spraying these bolts up here with some penetrating oil and we'll fast forward as Don removes these two 12 millimeter bolts. Now, underneath the car, on the lower part of the strut, right here, you can see that it's held in with an 18 millimeter bolt. We're just going to fast forward as Don removes this and you can see he uses a piece of pipe for leverage. It just makes it easier to remove that bolt. Once the bolt's out you just want to pry the strut up and off. Then you want to just pull the strut down and out and watch out. The little rubber cap at the top will fall down.
Now, to remove the outside of the strut and put it onto the new one you just want to put this into a vise. Use vise grips to hold the end of it and then, using a 14 millimeter wrench, just loosen up the nut at the top there. Once the nut's removed you can pull the outer part of the strut off and you can see the old one in the back, the new one from 1A Auto up front. They're identical and they'll mount exactly the same.
Now, slide the outer part of the strut onto the new strut and we'll fast forward as Don puts it back in the vise. Same as before, just reverse the order and tighten that back up.
Now, feed your strut back up into the wheel well with the rubber cap on top of it. Now line up the top into the hole and line up the holes on the strut with the studs and then just replace those two 12 millimeter nuts. Now, using a pry bar and a hammer you just want to carefully push that strut back into place. Then, replace that 18 millimeter bolt. Then, you're all set with this side and you want to repeat the process on the other side.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best servise on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
