Replaces

2002-2005 Mercury Mountaineer Front Brake Pad & Rotor Kit CERAMIC

Part Details

  • Front / Rear Location: Front

  • New

This brake rotor & pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • Professional Grade Ceramic Enhanced Disc Brake Pads
  • 4 Piece FRONT brake pad set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Come as a PAIR
  • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 1L2Z1102AC, 1L2Z 1102 AC, 1L2Z1125AA, 1L2Z 1125 AA, 3L2Z1125BA, 3L2Z 1125 BA, 4L2Z1102AC, 4L2Z 1102 AC, 4L2Z1125AA, 4L2Z 1125 AA
  • Fits 5 lug wheels
  • Direct replacement
  • 12" (305mm) diameter

This brake rotor & pad set makes great replacements and has excellent value over the price of dealer brakes.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. Removing the Wheel (0:45)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. Inspecting the Brakes (1:12)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check for gouges on both sides of the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
  3. Removing the Brake Pads (1:52)
    • Unclip the ABS wiring from the wheel knuckle with a flat blade screwdriver
    • Remove the two 14mm bolts from the brake caliper
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Pull the caliper aside
    • Secure the brake caliper with wire ties
    • Pry the brake pads off with a flat blade screwdriver
  4. Removing the Brake Rotor (3:34)
    • Remove the two 18mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
  5. Preparing the New Brake Pads and Rotors (3:48)
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Clean the brake pad slides with a wire brush
    • Apply grease to the caliper slides
    • Clean the rotor with brake parts cleaner or mineral spirits
  6. Installing the Caliper Bracket (5:58)
    • Put the caliper bracket back into place
    • Start the two 18mm bolts by hand
    • Tighten the 18mm bolts to 85 foot-pounds of torque
  7. Installing the Brake Pads (6:31)
    • Apply grease to the brake pad tabs
    • Install the new brake pads into the bracket
    • Tap the pads into place with a hammer, if necessary
    • Remove the wire tie from the caliper
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Put the caliper on
    • Thread the two 14mm bolts by hand
    • Tighten the 14mm bolts to 25 foot-pounds
  8. Reattaching the Wheel (8:55)
    • Clip the ABS sensor wiring into place
    • Wipe down the rotor
    • Remove the placeholder lug nut
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
  9. Testing the Brakes (10:01)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands
  • Large C-Clamp
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner
  • Cloth Rags
  • Mineral Spirits
  • White Grease
  • Wire Ties

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 18mm Socket
  • 19mm Socket

How-to Video:

(10:30 min)

Tools List:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands
  • Large C-Clamp
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner
  • Cloth Rags
  • Mineral Spirits
  • White Grease
  • Wire Ties

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 18mm Socket
  • 19mm Socket




Vehicle Fit

  • 2002-2005 Ford Explorer Front Brake Pad & Rotor Kit CERAMIC
  • 2002-2005 Mercury Mountaineer Front Brake Pad & Rotor Kit CERAMIC
$86.95
Part #: 1ABFS01205

Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est