Replaces
This part doesn’t fit a . Select from parts that fit.
Light Assembly Lifetime Warranty
Frequently bought together
Part Details
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
The bulbs are for testing and not covered under our warranty. Our warranty applies to the light assembly only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to service the bulbs as well as replace the entire headlight assembly on this 2004 Jeep Liberty. We show you on the passenger side, but the driver side is the same procedure. The items you'll need for this include new headlights from 1AAuto.com, a T20 Torx driver, and a flat blade screwdriver.
Along the top of your grill, you'll see these four T20 Torx bolts. Just go ahead and remove those. Then pull your grill forward, up, and off. Now, remove these two T20 Torx bolts, and we will just fast forward as Don does that. Pull the light forward, pry up on this tab, and pull the harness free.
Now, to service your bulb, you just twist this ring counterclockwise and pull the bulb out. Push your new bulb in and twist this ring clockwise to lock it. On the left is the old headlight; on the right is the new one from 1A Auto. You can see they're identical, and they're going to fit exactly the same.
Connect your harness to your new headlight. Then line up this tab, push it back into here, and then replace those two T20 Torx bolts. Place these four hooks into these four slots, then angle the grill back, and then just press in either side, replace those four T20 Torx bolts, and we'll just fast-forward as Don does this. Then, you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
