Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Headlight 2001-11 Ford Ranger
How to Replace Corner Light 2001-05 Ford Ranger
Created on:
Tools used
No Tools Needed
1. Remove the headlight assembly
Pull up on the two tabs above the headlight assembly
Pull out the headlight assembly.
Unplug the harness.
Replace the bulbs if that is all that is needed, otherwise replace the entire assembly.
2. Install headlight assembly
Adjust the adjustor bolts to match the old assembly.
Plug the bulbs and harness into the new headlight assembly
Put the headlight assembly into place.
Push down the tabs.
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet.
Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20-plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1aauto.com. The right parts installed correctly. That's going to save you time and money. Thank you and enjoy the video.
In this video, we're going to show you headlight removal and installation on this '04 Ford Ranger, pretty much the same for any '93 to present Ranger and no tools are necessary. Headlights on these Ford Rangers are really quite nicely designed and pretty easy. There are two tabs that you pull up on right back here. Once you have those tabs up, just pull your light forward. Now, here's the bulb. You can access the bulb easily. Pull this protector off and then your turn signal bulb, you twist, and it comes out, and your light is out. Obviously, you can service the bulbs.
The headlight bulb, you twist this, pull it out, and then you can pull the bulb out. Here's our original light, and here's the new light from 1A Auto. Now, obviously if your original light has been broken or something, you're going to want to replace it with a new one. You can also see, this truck doesn't have many miles on it, so the lens isn't too cloudy or faded, but if you drive your truck a lot of miles or in sandy conditions, these lenses can get pretty chipped up and clouded. A nice easy way to fix that is to just put a new set of lights in. You can see our lights are going to mount in the same. They have all the same connectors and everything so everything is going to go in just like the original.
One tip is before you put the new light in, just try and match it up with the distance. You can see that this adjuster is pretty close to the light there, so just preliminarily aim it. Take your new light and just try and get that just about the same distance. For now, obviously this light is fine, so we're going to put it back in the truck. Installing is just the reverse of the procedure. Put your signal in first, turn and lock, plug your light bulb in, and then carefully place it back in there.
I'm kind of looking down to make sure that all the adjusters are going into their holes properly. The lower one here is just a little bit off. There we go. Down there, just make sure that is all the way through. Then on this side, make sure that one there and the one down below, which is hard to see. Make sure those are all the way in. Push it really good. Push down on your tabs. You can see that mine's not in very well. Put it back up here. Push down and mount it nice and secure.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free, 888-844-3393. We're the company that's here for you on the internet and in person.
Tools used
6mm Socket
Ratchet
1. Removing the Headlight
Pull up the two headlight tabs
Pull the headlight forward
Pull off the headlight bulb connector
Twist out the signal light bulb
2. Removing the Parking Light
Remove the two 6mm bolts from the parking light
Pull the parking light off its pin
Twist out the parking light bulb
3. Installing the New Parking Light
Twist in the parking light bulb
Push the new parking light onto its clip
Insert the two 6mm bolts into the parking light
4. Reinstalling the Headlight
Twist the signal light bulb into the headlight
Connect the headlight wiring connector
Push the headlight into place using the adjuster bolts
Hold the headlight in place as you push in the two headlight tabs
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing or maintaining your vehicle. I'm going to use my 20-plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly: that's going to save you time and money. Thank you and enjoy the video.
In this video we will replace the parking light on this 2004 Ford Ranger, the same as any '01 to '07 Ranger. You start out by, to get to the park lights, you remove the head lights. There are 2 tabs that you pull up on right back here. Once you have those tabs up, just pull your light forward. Here's the bulb. You can access the bulb easily. Pull this connector off. Then, your turn signal bulb, you twist, and it comes out, and your light is out.
Once you have your headlight out, remove those two 6 mm bolts. It has a little pin that holds it in right there. You can twist and remove that.
Here's our original light. Here's our new light from 1A Auto. You can see they're exactly the same. If you're looking to freshen your lights up, to freshen your truck up, it will do well, all of those scratches. Obviously, if you get in a little skirmish, with a rock, or a little bit of a fender bender, it takes out your marker light, this is a perfect replacement. All the mounting points are the same, and it's going to go in there exactly the same.
Obviously, to put it back on is the reversal of the procedure. Put your light in. Twist. Set it in. Put in the 6mm bolts.
Installing is the reverse of the procedure. Put your signal in first, turn and lock. Plug your light bulb in. Then carefully place it back in there. I'm kind of looking down to make sure all the adjusters are going to their holes properly. This middle one, here, is a little bit off. There we go. So, down there, just make sure that is all the way through. On this side, make sure that one there, and the one down below, which is hard to see. Just make sure those are all the way in. Push in real good. Push down on your tabs. You can see this one's not in very well. Pull back up. Push down. Now, it's in nice and secure.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
LHT09222
In Stock
Product Reviews
Loading reviews
4.67/ 5.03
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
1
0
0
0
Ok then
M
December 12, 2018
I got what I ordered. It was well packed. Nice that it came as a set, headlight and turn light together.
I think it was a little pricy compared to salvage yards but it is warranted and that is good. I have not installed it yet but compared to the passengers side, looks good.
2005 headlight ford ranger
L
December 29, 2019
Fit perfectly came quick fair price
Headlight replacements
Jane
February 22, 2020
Bought 2 to replace one broken and one hazy
Light. Fit perfect and it was alot faster than
Sanding and clear coating and buffing out the
Old one. The cost was low compared to
The time I would have spent.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.