2000-2000 Buick LeSabre Limited Headlight (Without Lined Hi-Beam Lens) Pair1ALHP00705
- Quantity: Pair
- Comes as a PAIR
- Fits both the LH (Driver) and RH (Passenger) Sides
- Replaces dealer part number: 25713550, 25713549, 19245369, 19245380
- Smooth High Beam Lens
- Includes lens and housing
- Bulbs not included
- Correct for Limited models that do not have a lined or fluted hi-beam lens
- Not correct for Custom models
Effective June 23, 2014: This item is backed by a manufacturer's Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.
Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.
Changing the High Beam bulb
- Pull counterclockwise on the socket.
- Pull back on the tabs and pull the bulb free,
- Replace and twist the socket back in.
Removing the Headlight Assembly
- Remove the 10mm bolts at the top back of the headlight.
- Remove the blue safety clip. Disconnect the lights.
Changing the Headlight Bulbs
- Twist the headlight counterclockwise and can be changed.
- The cornering lights just push the tabs and turn counterclockwise.
- The side marker light just turns counterclockwise.
Replacing the Headlight Assembly
- Twist the signal and side marker light free from the old headlight assembly.
- Remove the harness on the back of the headlight assembly by removing the three pins that secure it.
- Put the harness on to the new headlight assembly and replace the three pins.
- Twist the sockets into place and reconnect the headlights.
- Push the blue safety tab back into place.
- Line the headlight assembly up on the car and push it into place.
- Replace the two 10mm bolts at the top of the headlight.
How-to Video:(06:31 min)
- Needle nose pliers
- Socket Extensions
- 10mm Socket
Pliers, Cutters & misc Wrenches
Ratchets & Related
Sockets - Metric
- 2000 Buick LeSabre Limited Headlight (Without Lined Hi-Beam Lens) Pair
Part #: 1ALHP00705
- Ships Same Day for orders placed by 5 P.M. ET
Free GROUND SHIPPINGCheck Shipping Rates
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."- Dwuan M.