Monroe Quick-Strut® 171686
This is a new MONROE strut and spring assembly. We recommend replacing struts in pairs and performing an alignment after replacement.
Quantity: (1) Quick Strut
Side: LH (Driver) or RH (Passenger) Side
Vehicle Type: All Sedan Models
Engine Size: All
Quick and easy... remove and replace one piece! No need to take apart entire assembly. No need to compress coil springs. Do the complete job right the first time. Enhances the handling, safety and performance of your vehicle.
Includes the following preassembled components :
Note for 1998 models:
- Upper Mount
- Upper Spring Isolator
- Upper Spring Seat
- Coil Spring
- Boot Kit
- Lower Spring Isolator
- Premium Strut
Due to a production change in the 1998 model year, the spacing between the lower strut mounting bolts on the rear struts
needs to be measured for a correct fit. This part is correct for vehicles that came equipped with the 61.2 mm (2.4 in) spacing. Vehicles with the 81.3 mm (3.2 in) spacing require the older, 1997 version
The revolutionary Monroe Quick-Strut unit is the first complete, ready-to-install replacement strut assembly available! Monroe Quick-Strut units include all the components required for strut replacement in a single, fully-assembled unit. They feature pre-assembled replacement upper mount, upper and lower spring isolators, upper spring seat, coil spring, boot kit, and a premium strut. This breakthrough design saves on installation time by eliminating having to disassemble components and compress the coil spring prior to installation. Each Quick-Strut assembly features application-engineered valving to optimize each vehicle's unique ride and handling characteristics.
In the past, replacing struts required specialized tools to compress, remove and transfer the spring. Our new strut and spring assemblies make this job much simpler for the do it yourself mechanic. This part comes pre-assembled. Jack up and support the vehicle with jack stands. Remove the wheel. Unbolt the top mounts and the bottom from the suspension and replace the whole unit. The large bottom bolts usually require an impact wrench and socket for removal. When reassembling, be sure to torque all nuts and bolts to their proper specifications. Do not use impact tools when reassembling.
Warranty Note: Tenneco Inc. warrants qualifying Monroe® products against defects and wear-out when used on private passenger cars and light trucks under normal operating conditions for as long as such original purchaser owns the vehicle on which they were originally installed.
Tenneco's obligation under this warranty is limited to replacement of the worn-out or defective product in accordance with this warranty. Cost of removal and installation are not included, and any incidental and consequential damages are excluded under this warranty, regardless of when the failure occurs. This warranty has no cash value. This warranty does not apply to products which have been modified, improperly applied or installed on vehicles used for commercial or racing purposes.
This item is backed by a manufacturer's Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.