Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the head light switch on this 2002 Chevy Suburban. The items you'll need for this is a new headlight switch from 1AAuto.com and a flat blade screwdriver.
To start off, we need to remove the dash panel, so just make sure your steering wheel is horizontal. Pull down your shifter all the way down and then just pull out on this panel, and you want to slide it forward and up and over the steering wheel. Now, pry up on the side of your headlight switch and pull it out. Then, just push the tab on this harness and disconnect it.
Take your new headlight switch, connect the harness, and then push the switch back into place. Take your dash panel, put it up over the steering wheel, tuck it down behind that steering column, line up the panel, push it back into place, and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
First thing you wanna make sure the steering wheel column is all the way down. So, adjust it to the lowest position. Turn the key on. With your foot on the brake shift all the way down to first gear. Now, we're gonna grab this panel right here and just slide it out. It slides out just like that. While I'm working on this shift back into park, turn the key off. Just take a pocket screwdriver, go underneath the switch right here. Just try to grab and pull it out a little bit. Then there's a tab right here. So, there's a tab on the top and two tabs on the bottom. Slide the switch right out. Disconnect the connector right there. Push down on that lock pin and slide the connector out. All right. Take the new light switch, line the connector up, lock it in place and slide it back in position. Make sure the steering column is all the way down again. Push on the brake, shift into first. Take this trim piece and just slide the bottom in first. Just carefully slide this in position. Now, sometimes it's a little tricky to get the bottom to line up. There's some pins on the side. Get the pin lined up, get that pin lined up and try to push it straight on. And that looks good. Shift it back in park, turn the key off, readjust the steering wheel.
