Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Part Details
NOTE: It is necessary to reuse your original hardware, as new hardware is not included with this item.
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Item Condition:
New
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
In this video, we're going to show you how to replace the front grille on this '94 Camry. The only tools we used were a 10mm socket and ratchet, although our fasteners didn't look like they were the correct ones, so you may have different size bolts or you may even have screws that fasten the top of the grille on.
To remove the front grille, you can see on ours it's actually broken here, but there's two bolts. On this vehicle they're 10mm bolts, although they don't look very factory to me, so your vehicle could have different bolts or screws. There's two bolts on the top and then there's clips down at each corner. It's actually fairly easy to remove. Now, once you have those bolts out, you just lift up. There are two clips under here that go down into the headlights. The grille's out.
You're going to want to remove your Toyota emblem. There are two screws in the back here: Phillips. You're going to want to really press hard in and you might even want to try to move them to the clockwise just a little bit to break them loose. Put the emblem into the new grille.
The new grille has a locater pin here that was broken off on the original one. It goes right into a hole in the center. Then you want to press one side in and press the other side down in and put in our two bolts
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
