NOTE: It is necessary to reuse your original hardware, as new hardware is not included with this item.
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
48 States Only: Due to shipping restrictions, we can only ship this to a street address within the Contiguous U.S. (lower 48 states).
How to Replace Headlight 2001-11 Ford Ranger
Created on:
Tools used
No Tools Needed
1. Remove the headlight assembly
Pull up on the two tabs above the headlight assembly
Pull out the headlight assembly.
Unplug the harness.
Replace the bulbs if that is all that is needed, otherwise replace the entire assembly.
2. Install headlight assembly
Adjust the adjustor bolts to match the old assembly.
Plug the bulbs and harness into the new headlight assembly
Put the headlight assembly into place.
Push down the tabs.
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet.
Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20-plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1aauto.com. The right parts installed correctly. That's going to save you time and money. Thank you and enjoy the video.
In this video, we're going to show you headlight removal and installation on this '04 Ford Ranger, pretty much the same for any '93 to present Ranger and no tools are necessary. Headlights on these Ford Rangers are really quite nicely designed and pretty easy. There are two tabs that you pull up on right back here. Once you have those tabs up, just pull your light forward. Now, here's the bulb. You can access the bulb easily. Pull this protector off and then your turn signal bulb, you twist, and it comes out, and your light is out. Obviously, you can service the bulbs.
The headlight bulb, you twist this, pull it out, and then you can pull the bulb out. Here's our original light, and here's the new light from 1A Auto. Now, obviously if your original light has been broken or something, you're going to want to replace it with a new one. You can also see, this truck doesn't have many miles on it, so the lens isn't too cloudy or faded, but if you drive your truck a lot of miles or in sandy conditions, these lenses can get pretty chipped up and clouded. A nice easy way to fix that is to just put a new set of lights in. You can see our lights are going to mount in the same. They have all the same connectors and everything so everything is going to go in just like the original.
One tip is before you put the new light in, just try and match it up with the distance. You can see that this adjuster is pretty close to the light there, so just preliminarily aim it. Take your new light and just try and get that just about the same distance. For now, obviously this light is fine, so we're going to put it back in the truck. Installing is just the reverse of the procedure. Put your signal in first, turn and lock, plug your light bulb in, and then carefully place it back in there.
I'm kind of looking down to make sure that all the adjusters are going into their holes properly. The lower one here is just a little bit off. There we go. Down there, just make sure that is all the way through. Then on this side, make sure that one there and the one down below, which is hard to see. Make sure those are all the way in. Push it really good. Push down on your tabs. You can see that mine's not in very well. Put it back up here. Push down and mount it nice and secure.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free, 888-844-3393. We're the company that's here for you on the internet and in person.
Product Reviews
Loading reviews
5.00/ 5.05
5 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
5
0
0
0
0
Ford Ranger Parts
L
October 28, 2017
Wow...blistering fast shipping for older Ford parts that were quickly sourced. This company rocks; 1-A1 Auto is my first choice in parts for their great selection, price, and customer service.
ford ranger
W
May 29, 2020
what I needed and a good price and on time
Great
Juan
May 20, 2021
I bought this to do an front end swap on my 1998 ranger. It fit perfectly, didnt have the hardware though. Besides that, it came in fast.
Christopher
November 25, 2021
Good
Alwyn
March 16, 2024
Everything is clean, looks nice, and fit well.
Customer Q&A
Do you have a hardware package for your parts?October 25, 2018
Wilson P
10
We do not have any separate hardware for this part number.
October 26, 2018
Emma F
Is there a way I could just buy the grille itself without the other stuff?October 29, 2020
. .
10
Yes, the grille can be purchased under part number 1ABGR00362.
October 29, 2020
Jessica D
Can you buy hardware for this part?April 28, 2021
Walter M
10
New hardware is not included with this item. You may be able to reuse your original hardware if it is in good condition.
April 28, 2021
Ricale A
Will this fit a 2003 ranger edge?December 23, 2023
John D
10
Yes, this part will fit your vehicle.
December 27, 2023
Meghan R
10
Yes it will
January 10, 2024
Bronson N
this kit fits on my 98 ranger ?March 20, 2024
Francisco A
10
This kit will not fit your vehicle. We can check to see if we carry the set you need. Does your vehicle have RWD or 4WD? What is the sub model?
March 20, 2024
Andra M
10
I put this on my 02, but I do have a 98 also. Looks like it would fit on mine. The center grill and lights are different but the inside part they go on looks like it mounts on the truck the same.
March 20, 2024
Alwyn J
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Ford is a registered trademark of Ford Motor Company. 1A Auto is not affiliated with or sponsored by Ford or Ford Motor Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.