U.S. Toll-Free Call Center   Hours
888-844-3393
Espanol: 866-401-3393


Highest Ratings

Quality: We've got the awards to prove it!

We've won the Bizrate Circle of Excellence award, five years in a row. Rated outstanding for quality, satisfaction, service, and on time delivery. 1A Auto selects the highest quality parts from the best manufacturers. Check our excellent ratings.
Fastest Shipping
No-Hassle Returns
USA Support Techs
Best Value
Our Guarantee

Customer Feedback


I used to rely on parts stores...
Buick Roadmaster
Jeff, Winter Springs, FL



Home > Toyota > Highlander > Wheel Bearing & Hub - Front > 2001-2011 Toyota Highlander 4WD Front Wheel Hub

 
  Send to a friend    
    
  Product views

2001 - 2011 Toyota Highlander 4WD Front Wheel Hub


1ASHF00145

In Stock (Ships same day for orders placed by 3 PM ET)



SAVE
42%
List Price:$137.95

Our Price: $79.95
 (You Save $58.00)

Free Ground Shipping
Part Number: 1ASHF00145
Quantity:
  
 




Welcome Message from 1A Auto


This replacement wheel hub is just what you need to get your vehicle in good working order again.

Specifications:

  • Fits either LH (Driver Side) or RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 43502-28090, 43502-AA010, 43502-AA011, 4350228090, 43502AA010, 43502AA011
  • Fits 5 Lug Wheel
  • Wheel studs already installed
  • Fits inside wheel bearing
  • Direct replacement
  • Built to strict quality control standards
  • Wheel bearing is not included, buyer will need to reuse old bearing
This wheel hub is a great replacement and has good cost savings over a unit from the dealer.

Quality

  • 1A Auto exclusive 2 Year Warranty.
    • If this hub should fail to provide satisfactory performance you may exchange it.
  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both Bizrate.com and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.

Fit Guaranteed

  • This hub will install just as your original does. You can use your existing hardware and bearings.
  • We also have plenty of installation videos to help you get the job done right the first time.

Value

  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.

 

Installation

1. Jack the vehicle up and support with proper jack stands.

2. Remove the wheel and tire.

3. Have a helper hold the brake pedal while you loosen the Axle Shaft Nut. This usually requires a large socket (30mm or larger) and impact wrench.

4. Remove the brake caliper and brake rotor. Use string or a plastic tie to hang the caliper up and out of the way. DO NOT allow the caliper to hang by its own brake hose.

5. Unplug ABS sensor (if applicable)

6. Unbolt the hub flange. The hub may come free from the axle shaft easily, if not, use a gear puller or similar tool that pulls on the hub while pushing on the axle shaft. DO NOT try to drive the axle out with a hammer, this could ruin your axle CV joints.

7. Reverse order to install.

We were able to do a removal and replace on a GM car in about 45 minutes.

NOTE: If you are unsure which of your hubs is bad listen while you turn the wheel slightly. If you hear the noise while you curve to the right and it goes away when curving to the left your RIGHT hand or passenger side hub is going bad and vice versa. In our experience replacing both hubs is best even if only one is bad. Most likely the other side is gong to go bad soon. Original Equipment (OE) hubs usually last to just over 100,000 miles.



This part replaces:
  • HOLLANDER #: 538-58863
  • OE #: 43502-28090 43502-AA010-11
  • DORMAN #: 930-401

See 1A Auto on Facebook Watch our auto parts installation videos on Youtube Nutts and Bolts Blog Google Plus
Free Shipping