U.S. Toll-Free Call Center   Hours
888-844-3393
Espanol: 866-401-3393


Highest Ratings

Quality: We've got the awards to prove it!

We've won the Bizrate Circle of Excellence award, five years in a row. Rated outstanding for quality, satisfaction, service, and on time delivery. 1A Auto selects the highest quality parts from the best manufacturers. Check our excellent ratings.
Fastest Shipping
No-Hassle Returns
USA Support Techs
Best Value
Our Guarantee

Customer Feedback


I used to rely on parts stores...
Buick Roadmaster
Jeff, Winter Springs, FL



Home > Nissan > Altima > Wheel Bearing & Hub - Front > 2002-2006 Nissan Altima Front Wheel Bearing Pair (Timken)

 
  Send to a friend    
    
  Product views

2002 - 2006 Nissan Altima Front Wheel Bearing Pair (Timken)


TKSHS00622

In Stock (Ships same day for orders placed by 3 PM ET)



SAVE
55%
List Price:$224.16

Our Price: $99.95
 (You Save $124.21)

Free Ground Shipping
Part Number: TKSHS00622
Quantity:
  
 




Welcome Message from 1A Auto


TIMKEN WHEEL BEARINGS: 510060

These replacement wheel bearings are just what you need to get your vehicle in good working order again.

Specifications:

  • Brand New Timken Wheel Bearings
  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part number: 40210-2Y000, 402102Y000
  • Direct replacements
  • Attach to front hub and knuckle assemblies (See diagram)
  • Replace only defective bearings if needed
These wheel bearings make great replacements and have good cost savings over the dealer parts!

Installation

1. Jack the vehicle up and support with proper jack stands.

2. Remove the wheel and tire.

3. Have a helper hold the brake pedal while you loosen the Axle Shaft Nut. This usually requires a large socket (30mm or larger) and impact wrench.

4. Remove the brake caliper and brake rotor. Use string or a plastic tie to hang the caliper up and out of the way. DO NOT allow the caliper to hang by its own brake hose.

5. Unplug ABS sensor (if applicable)

6. Unbolt the hub flange. The hub may come free from the axle shaft easily, if not, use a gear puller or similar tool that pulls on the hub while pushing on the axle shaft. DO NOT try to drive the axle out with a hammer, this could ruin your axle CV joints.

7. Reverse order to install.

We were able to do a removal and replace on a GM car in about 45 minutes.

NOTE: If you are unsure which of your hubs is bad listen while you turn the wheel slightly. If you hear the noise while you curve to the right and it goes away when curving to the left your RIGHT hand or passenger side hub is going bad and vice versa. In our experience replacing both hubs is best even if only one is bad. Most likely the other side is gong to go bad soon. Original Equipment (OE) hubs usually last to just over 100,000 miles.

Note: This part is an authentic Timken brand product that is supplied and packaged by Timken.   In some cases, Timken will source parts from other high quality suppliers such as SKF and Koyo. These parts are subjected to the very same testing and quality standards as all Timken products.

Part Brand: TIMKEN # 510060


See 1A Auto on Facebook Watch our auto parts installation videos on Youtube Nutts and Bolts Blog Google Plus
Free Shipping