BECK / ARNLEY CONTROL ARM: 101-5140
Beck/Arnley® is a leading specialty supplier of premium, quality import parts for cars, light trucks and SUVs. Unlike others, Beck/Arnley is committed to meeting their
promise to provide the import parts by model and year to equal OE form, fit, and performance. Beck/Arnley's broad product offering for the aftermarket is organized into six modules: Brake &
Chassis, Electrical, Clutch & Driveline, Engine Management, Engine Parts & Filtration, and Cooling Systems. All Beck/Arnley products meet or exceed OE
specifications.
Specifications:
-
Brand New Beck / Arnley Control Arm
- LH (Driver Side) FRONT LOWER
- Replaces dealer part numbers: 0K55234350, 0K55234350B, 0K55234350C
- Includes ball joint
- Direct replacement
- Built to strict quality control standards
Worn ball joints can cause excessive front tire wear, popping or creaking in the front end, extra play in the steering system, and pose a serious safety concern. Replace loose or worn ball joints
with our quality replacement. One way to diagnose a loose, or warn ball joint, is to jack the car up, so the wheel is off of the ground, then have someone try to move the wheel in and out. While
they are moving the wheel check the ball joint for play, if it is moving you probably need to replace it. Remember whenever you are replacing any front end or steering components you should have
your vehicle professionally aligned as soon as possible. This will ensure proper tracking and even tire wear.
Beck/Arnley thinks of the needs of the service technician first. They evaluate OE parts for each vehicle model and year, and determine the quality standards needed for maintenance and repair work.
As automotive vehicle professionals, the Beck/Arnley Product Managers seek out finished goods or assembled kits to cover the basics of the installation and make improvements when possible.
In other words, Beck/Arnley parts look, fit, and install just like the originals. They are the right replacement parts for you vehicle!
1A Auto Company Warranty
All parts are covered by a 60-day 1A Auto warranty against defects or failure. In the event of a part failure, a replacement will be shipped out at no cost and a pre-paid shipping label will be emailed to cover the cost of returning the defective part back to 1A Auto.
