Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video we're going to show you how to replace the rear transmission mount on this 2004 Volkswagen Jetta. It is a manual transmission with the 1.8 turbo engine. The tools you'll need for this is a 13mm and 16mm socket and ratchet, and jack and jack stands. Your rear transmission mount is located right here. To remove it you want to remove these two 16mm and these two 13mm bolts. We'll just fast forward as Don removes both of those. Once those are removed, the transmission mount will just pull free.
Take your new transmission mount, push it into place, and replace those two 13mm bolts. We'll just fast forward as Don replaces the two 16mm bolts and then tightens all four of them up. Once they're all nice and tight you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Tools used
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the torque strut mount on this 2001 Volkswagen Beetle. It's the same part and similar process on these Beetles for '98 to 2005. The items you'll need for this is a new torque strut mount from 1aauto.com, a 13mm and 16mm socket and ratchet, jack and jack stands, and a pry bar.
Your torque strut mount is located right here, and it's held in with two 13mm bolts. Go ahead and remove those. Now remove these two 16mm bolts, and the torque strut mount will pull out.
Up top is the old torque strut mount; below it is the new one from 1A Auto. You can see they're identical and they'll fit exactly the same.
Put your new torque strut mount up into place, and replace those two 13mm bolts and tighten them up. Now using a pry bar, pry the engine forward, and then replace those two 16mm bolts. Now you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
