Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Left Hand Drive:
All of our auto parts are intended for Left Hand Drive USDM vehicles. If your vehicle is Right Hand Drive, please ensure the part is correct for your specific vehicle.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
Going to pull down the wire harness. It's clipped to the blower motor. Just give it a good pull and it will snap off. It's got this little push clip right here, and you can unplug it. Reach in and push the lock in. Pull it out. Put that aside.
There are three screws that hold the blower motor into the HVAC box. There's one in the back here, one here, and one here. They are eight millimeter, or you can use a T25 Torx to remove them. It will fit right in there. I've got an eight millimeter socket extension and ratchet, and just remove them. I'm going to go for this back one, and this one up in here. I'm also going to hold on to the blower motor. It's going to want to come out of the box. Usually these blower motors fall right out. This one seems to be stuck. I'm going to use this plastic prying tool. You can get these from 1AAuto.com. I'll use this big one here and just pry on the edge, pull it down, and there we go it came loose.
We're going to reuse this blower motor because it's working just fine. Put it back up into place. This part is going to match up with this part here. Probably have to slide it past the carpet. Just get it up in there. Push it up into place. There it is. Get one of these screws caught. These are just self-tapping, going into plastic, so you don't have to go crazy tightening them. They'll get tight to stop, and do the same for the other two. And that will tighten up just like that. Plug the wire back in to the connector. Click when it locks into place. We'll just spin this up, and it clips right to the blower motor. Blower motor is replaced.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
