Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Left Hand Drive:
All of our auto parts are intended for Left Hand Drive USDM vehicles. If your vehicle is Right Hand Drive, please ensure the part is correct for your specific vehicle.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Hi, I'm Mike from 1A Auto. We've been selling auto parts for over 30 years. We're dedicated to delivering quality auto parts, expert customer service, fast and free shipping, all backed by our 100% satisfaction guarantee. Visit us at 1AAuto.com, your trusted source for quality auto parts.
Remove the sound baffle. This is held on by two 7-millimeter screws—there's one under here and one over here, so we use my 7-millimeter ratchet and socket and start removing them. With the two 7-millimeter screws removed, there's a hidden one behind the console here. This sound cover has a lot of flex in it, so I'm just going to pull it down and just leave it like that. I can access the blower motor right here. There are no screws holding this blower motor in. There is a locking tab right here. I'm going to pull this tab down, and with the other hand, do my best to pull it down, it's a bit stiff. With my other hand, I'm going to turn the blower motor clockwise to unlock it, and it's going to pull out.
Now that I can get to the connector which is on the backside, I'm going to spin it around. I'm going to take a wide flat-bladed screwdriver to help me push in this lock. It's pretty hard to push with your fingers, so it's easier to just take a wide flat-bladed screwdriver to push it down and then sort of wiggle the plug out. Now we can remove the blower motor from the car.
Okay, we're going to use our old blower motor because it's working fine. We just wanted to show you how to remove it and reinstall it. I'm going to take the connector now, plug it back in. With this tab facing the front of the vehicle towards the firewall, you're going to lift it back into place. Turn it a little bit, it's going to seat, and then you're going to turn it counterclockwise. It's going to lock in. Now it's installed.
Push our plastic sound cover back up. A couple of ducts to fit over here. Install our 7-millimeter self-tapping screws. I'm going to use my fingers to tighten these, until I feel them stop. I'm going to just use my fingers, just as it gets tight, and stop.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Tools used
