Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Left Hand Drive:
All of our auto parts are intended for Left Hand Drive USDM vehicles. If your vehicle is Right Hand Drive, please ensure the part is correct for your specific vehicle.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we'll be showing you how to replace a blower motor resistor on this 2003 Nissan Maxima. It's a pretty easy operation; you're just going to need a Phillips screwdriver and probably a flashlight.
If you find that your climate control unit and the blower fan only works in high or low, or intermittently goes in and out, most often it's your blower motor resistor. The blower motor resistor is right under the glovebox. I'm removing the clip. Press down on the top and pull out. I'm going to remove the two Phillips head screws.
Here's the old part and the new part from 1A Auto. They're exactly the same and they're going to go in just the way they came out. The tab is going to go towards the front of the vehicle. You can see the notch here in the airbox. I'm going to reinstall two Phillips head screws and reconnect the harness.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
The blower motor resister is here under the dash. Actually, you can just see it, just make out the outline of this white and aluminum looking piece. It's got this little plastic protector so the passenger doesn't kick it. Behind it is the electrical connector. This is the harness it, pull the harness down a little bit. Actually, it might even be easier, we're going to unscrew it, there's two Phillip's head screws. We'll pull the resistor out and then unplug it. You're going to need a stubby Phillip's head screwdriver. This aren't very long. Pull it out. Grab the other one. The resistor will come out of the air box. I got to unplug it.
To reinstall it, leave it unplugged for now. Slide it up in here. There's an alignment tab, and there's a tab in the blower motor box that it has to line up with, so it goes to the front of the car. Slide it up into place. It'll kind of stay in place. The seal will hold it. Take our Phillip's head screws, reinstall them. An electrical connector, plug it back in. Put the harness back up in there. Blower motor resister is replaced.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
