Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Install Tip: You may be required to reset the vehicle computer after installation of this part.
Quality Tested - built to a strict level of product standards.
Item Condition:
New
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
Open the hood. Pull the release handle. It's down here above your knee. Release the safety, which is right here. This hood has hood struts. Disconnect the electrical connector at the mass air flow sensor. Push up on the lock. Wiggle the connector out. Use a Phillips head screwdriver to unscrew it from the intake tube. Put those screws aside over here. Just going to wiggle it out, pull it out of the intake tube.
Here's our original mass flow air meter from the vehicle. This is our brand new one from 1AAuto.com. Same style connector. Same style mounting tabs. Got a little sealing O-ring, just like the original. It should fit in there and work great for you.
This can only be installed to fit one way. It'll line up with the holes. It's going to sit right there in the intake tube. Install the screws. These are just small little self-tapping screws going in the plastic. As soon as I feel them get tight, I'm just going to stop. Right there. And right there. Reconnect the electrical connector and our air flow meter is replaced.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Tools used
