Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Butyl benzyl phthalate (BBP)d, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the wiper pulse board on this 1996 Chevy Tahoe. It's the same part and process on the Tahoe from 1995 to 2000. The items you'll need for this include a new wiper pulse board from 1AAuto.com, a T20 Torx bit, and a ratchet.
Now just pull out this blue clip and then lift up on the tab on the harness and pull it free. Then remove these three T20 Torx bolts. Now pull that cover free, and then grab on to the harness connector and just pull it out.
On the left is the old wiper pulse board; on the right is the new one from 1A Auto. You can see they're identical, and they're going to fit exactly the same.
Now slide this pulse board back into the motor and then replace that cover. Then replace those three T20 screws. We'll just fast-forward as Don replaces and tightens up those three screws. Reconnect your harness and push that blue clip back into place. You're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
