Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Part Details
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
If you need to replace your tailgate handle you're going to start by removing all the screws that hold this backing plate on. Some of the screws may be covered with little buttons here so you have to pry up and off. Okay, fast-forward here, and you can see I pretty quickly ditched the hand screwdriver for a power screwdriver. The flat blade screwdriver helps pry up on some of those screws if they don't come out easily.
Okay, it's right here. Pry up that panel. Okay, now you can see the back of the handle. It's held in by two bolts here. We're going to undo these clips which just clip onto these rods. Okay, take the clips off and take the rods out. It does help to remove this one as well. This is just a lock. Okay, take a 10mm socket and loosen the one that's on the lock just to get it loose while it's in here. Take out the two that hold the handle. Pull the handle right through and out. Now we got to take your lock bolt out like that.
A handle from 1A Auto is a very appropriate replacement, and you want to put your lock mechanism back in. There's a little key so make sure you put it in the right position. Okay, your new handle will come with a couple little rubber grommets, and what you want to do: take anything tacky or sticky I'm using a little bit of just gasket cement, ou can use regular household glue or whatever and just put a little bit right on where the bolts go in. Okay, just enough, and then just stick these little rubber grommets right on there. You just want them so they don't fall off. Okay, this on there. Just a little insulator to keep them from rattling.
Just like before put the handle up in, hold it up there, set your screws on, hook that there, push right over.
It's always a good idea to use some rust penetrant. Always spray it on your hinges. Do a quick test.
Now I'm going to fast-forward here. Then I put that panel back in place and screw it in. If you have a bed liner put the panel back in place. The panel does have a little triangle on it. Make sure it's pointing up, and if you have the bed liner put it on top and put all the screws in place and fasten it, and you should be all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
