WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How To Replace Tailgate Cables 1999-2006 GMC Sierra
How To Replace Liftgate Handle Bezel 1992-99 GMC K1500
How To Replace Tailgate Handle 1992-99 GMC K1500
Created on:
Tools used
Ratchet
1/2 Inch Socket
1. Removing the Tailgate Cable
Remove the 1/2" bolt on the tailgate cable
Remove the cable
2. Installing the Tailgate Cable
Insert the cable into place
Tighten the bolt to the cable
Repeat the process for the other side
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing or maintaining your vehicle. I'm going to use my 20-plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly: that's going to save you time and money. Thank you and enjoy the video.
In this video, we'll be installing a tailgate cable on a 2004 GMC Sierra. It's basically the same as any GMC Sierra or Silverado from 1999 to 2006. The only tool you'll need is a 1/2 inch wrench.
Open up the tailgate. You got a bolt here. It's a ½ inch bolt. Remove that. If it's frayed, you can replace it. Not a difficult thing to replace at all. Most people can do it. If you're wondering how, that's how. A couple of keys, make sure if you're replacing one, the other one's in good shape. You don't want the tail gate to fall because if it falls, it will hit the bumper and it will get dented. Don't take them off both at the same time.
Just one little thing: When you're tightening it, you see the tailgate cable's made to go around the flint in this bolt. You need to lift up and make sure the tailgate cable goes on the bolt, and then tighten it. This allows that to keep moving. If you're tightening it up with getting it in that right spot, basically what will happen is your tailgate will just going to stay like this. This would end up pinching into there and probably damaging and scratching things. That's about it.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Trim Tool Set
All right. So to do this job, you're gonna need one simple tool. A plastic trim tool. Something that I want to show you, if you look at the backside of the little bezel, you're gonna see these little ears. That's where we're gonna be looking for with our plastic trim tool. We're gonna come right down right where that is, and then we'll pop it off. So, I'm gonna come like this. Give it a little twist. There we are. Do the same on the bottom. Okay. There we are. Let's get this puppy installed. Just gonna line it up. It should wanna press right in. Couple loving bonks. Get those clips in there. Beautiful.
Tools used
13mm Socket
Socket Extensions
Socket Driver
Phillips Head Screwdriver
So, now that we have the tailgate down, we have a clear view of all of our mounting bolts. We have two here, 13-millimeter. And then, if you were to go around, more than likely you have some Phillips heads. We're gonna remove them all. Here we go. Bring up the tailgate. Now, we can see what's going on in there. Let's see about popping this off of here. Here we are.
Now, this one right here has been broken for a while so it has a little wire tie. I'm just gonna get that right out of there using some cutters. Awesome. Now, you got these little white clips. They should kinda pry off of the bar there. And then, once you have it flipped up you can take the rod right off. This one obviously flips down. Here we are. Slide that out of right there. Here it is.
It's time to get this in here, just get it kinda lined up. You can grab your little rods. We're gonna put it through the hole just like that, and we're gonna spin this around so the lock comes around and clips right onto the rod. Give it a wiggle. That feels great. Do the same to the other one. Bright that one up and around. Lock it in. Perfect.
Get that started in there. We're just gonna turn it and try to make sure these bolt holes are lined up and they're not like that. Line them up nice. You see, when I tightened it, it kinda turned a little bit. Here we are. Let's get this back up on here. Line our bolt holes. Here we are. Now, I'm gonna go around the sides, start all those in as well. All right, let's start snugging them all up.
Let's get this puppy installed. I'm just gonna line it up. Make sure you wanna press right in. A couple of loving bonks. Put those clips in there. Beautiful.
BDA80329
In Stock
Product Reviews
Loading reviews
4.60/ 5.05
5 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
4
0
1
0
0
Worked but took some work
benjamin
March 4, 2017
The handle worked just fine. The hinge cups were too deep. The tailgate rubbed the body work when I tried to install the tailgate. I can't see any problem with my bed to say it is tweaked or anything. It works for my work Truck but I would be mad if I had a nice truck
Nice to have a working tailgate again
S
September 25, 2017
This kit comes with everything but the rods and the actual spring latches. Rods are sold separately. Didn't need the spring latches.
Completely rebuilt my tailgate on my 98 Silverado in a very short time. works as well as new.
Great parts at a great price
Keith-
February 23, 2018
The tailgate repair kit worked great. Looks great and was easy to install. Tank you so much.
Todd
July 10, 2023
Aw fits just write??
Good to go!
Merl
November 29, 2023
Fits right and the instructional video was really helpful.
Customer Q&A
Does this include the bolt attaching the cable to the tail gate?July 4, 2017
Brooks B
10
No bolts just what you see in the picture.
July 4, 2017
Richard C
10
No. All nuts and screws are reused.
July 4, 2017
Richard M
10
Nope
July 5, 2017
Gary H
10
No. Save your bolts (screws).
December 3, 2017
C D
10
No
October 9, 2018
D V
10
No, just the cables are included.
October 24, 2018
W A
10
Yes
October 25, 2018
D V
10
No bolts, just what you see in the picture.
February 3, 2019
T O
10
Yes
July 24, 2019
PEARL P
10
The attaching bolt for the cable is incorporated in the latch assembly
November 7, 2019
H O
10
Yes
December 17, 2019
J R
10
Yes
March 17, 2020
Lisa B
10
No,it does not reuse mounting bolt
May 1, 2020
Justin C
10
Yes. On my model the cable was riveted to the mounting bracket on the tail gate. The set came with a clip and pin for attachment after the Rivet was removed.
April 28, 2021
Charles W
Do these come with the clips for the rods?November 6, 2022
John D
10
This will not come with any additional clips as part of the assembly.
November 7, 2022
Emma F
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.