Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including 1,3-Butadiene, which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Hi, I'm Mike from 1AAuto. We've been selling auto parts for over thirty years. We're dedicated to delivering quality auto parts, expert customer service, fast and free shipping, all backed by a hundred percent satisfaction guarantee. We've created thousands of videos to help you install our parts with confidence, and that saves you time and money, so visit us at 1AAuto.com, your trusted source for quality auto parts.
In this video, we're going to be working with our 2006 Ford Explorer. We're going to show you how to remove your third brake light assembly so you can change out the housing. If you like this video, please click subscribe. We have a ton more information on this truck as well as man other makes and models, and if you need this part for your vehicle, you can follow the link down in the description over to 1AAuto.com.Here are the items you'll need for this repair.
To remove the third brake light cover, we'll remove these two Phillips head screws. Once our two screws are out, reach underneath the lens. Carefully peel it up off of the car. Disconnect the hose here for the rear window washer, and the electrical connector at the end by pushing down and pulling it away.
To remove your rear window washer nozzle, simply take a small flat blade screwdriver, press down on one tab while pulling down with your finger. You'll see you get the gap there. Keep pulling down there, press in on the other side, and pull it out of your third brake light housing.
Take your new rear window washer nozzle, being sure that the spray end is facing down into the flat portion of our third tail light. Snap it back into place. Reconnect the electrical connector. The push tab faces into the back of the housing. Reconnect your rear window washer nozzle hose. Lay the cover back into place, and reinstall your two Phillips head screws.
Check for proper operation of your third brake light and rear window washer nozzle, and you're good to go.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping and the best customer service in the industry.
