Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
The bulbs are for testing and not covered under our warranty. Our warranty applies to the light assembly only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Tail Lights 2010-15 Chevy Equinox
How to Replace Tail Lights 2010-17 Chevy Equinox
Created on:
Tools used
Flat Blade Screwdriver
10mm Socket
Ratchet
Trim Tool Set
1. Removing the Tail Light
Remove the plastic caps covering the mounting bolts
Remove the 10mm bolts from the tail light
Pry out the tail light with a trim tool
Disconnect the wiring harness
2. Installing the Tail Light
Connect the wiring harness
Insert the tail light into place
Tighten the 10mm bolts to the tail light
Place the plastic caps onto the mounting bolts
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
Today we're going to be changing the taillight assembly on this 2012 Equinox. If you need any headlight assemblies, taillight assemblies, or any other parts for your car, please check out 1aauto.com.
We're going to start by opening the taillight on the vehicle. You'll see you have two plastic caps covering the mounting bolts for this taillight assembly. I'm just going to pop them open with a flat edge screwdriver and set them aside. These are a 10 mm socket. Now we're going to grab it, and give it a firm pull. Sometimes if it's stuck in there pretty good. You can get these trim tools. 1A Auto sells them online, and you're going to pop it out. Try not to scratch the vehicle. We're going to disconnect first the assembly, the harness, pushing down on this tab and pulling.
To reassemble the taillight assembly, you take the plug from the car and match it up, and you'll hear a click. Line up the guide pins top and bottom, and then firmly push. You're going to have to make sure it's lined up. You might even actually have to hold it down a little. Start it with your finger. I like to leave them a little loose until they're both bottomed out, then I'll give it its final turn. Reassemble the covers, put the tab in at 12 o'clock, push down.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Tools used
Socket Extensions
Flat Blade Screwdriver
10mm Socket
Ratchet
GM547-B000L
In Stock
Product Reviews
Loading reviews
5.00/ 5.07
7 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
7
0
0
0
0
Tail Lamp Experience
Duane
January 24, 2017
The part was delivered quickly, looked great and was easy to install. Very satisfied.
Bela
January 28, 2017
Part arrived exactly on time. Perfect fit. I just installed it and it fits and works just like the original. I am very pleased with both the service and the product quality.
Easy to do
F
July 28, 2017
Changing the taillight casing was so easy. The fit was perfect and in less than ten minutes the job was done.
JRC
J
December 23, 2017
The tail lights were a perfect match. This is the second time I have ordered tail lights for a car. I will alway order car parts from IA AUTO.
What a deal.
Jesus
March 19, 2018
Old lady backed into someone's mail box and busted the driver's side taillight. Dealer wanted $206 plus tax. Got it from 1auto for $71.95 - delivered. Dealer would have to order it and I would have to wait 2 to 5 days. Got it from 1auto in 2 days. Made the switch in 15 minutes. Exact copy of OEM but at 1/3 the cost. Impressed the wife. Impressed me. Thanks guys.
Excellent
R
October 10, 2019
Great serviceWrite
Taillight assembly
dave
November 8, 2019
Exact match great price took me less than 10 minutes to install including mirror. I highly recommend this company.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Chevrolet is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Chevrolet or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.