Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Item Condition:
New
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace a power mirror switch on this 1996 Chevy Tahoe. The only items you need for this include a new power mirror switch from 1AAuto.com and a flat blade screwdriver.
Start off by prying up the back of your switch pack. You just want to pry it up with screwdriver so you can get your fingers underneath, then just lift it out, and then slide it back.
Now, using your flat blade screwdriver, pry back on this tab and pull the harness free. Next, just pry back on this tab, and then you can lift the switch up and out.
On the left, this is a new switch from 1A Auto; on the right is the old one. You can see they're identical, and they'll fit exactly the same. Take your new switch and push it straight down into place, and then reconnect your harness. Slide this tab forward, and then push the back end of your switch panel down into place, and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
We're going to lift up on this plastic piece here starting from the rear. There we are. Let's disconnect all this wiring. Switch right here. Just pull that right out of there. So, now we have a nice clear view of the rear side of the mirror switch here. We're going to go ahead and pop it right out of there. Move that wire. If you were to take your pocket screwdriver, can come right along the top area here, you can pry it, and then push. And then if you needed to, you can, of course, do the bottom area as well, and it comes right out.
Once you've compared your new mirror switch to your old one, and you know you've got the same connector and everything, we're going to continue on to install. To do that, we would just put it right on the backside, line it up, and then carefully press. It clicks right in. Give it a nice tug. Make sure that doesn't fall out. Last thing you want to do is push right here, and this goes [vocalization] inside your door. This looks great. We'll connect in our speaker wire. Super important. We've got our mirror wire. Click it in. Give it a tug. My wire is situated here. Going to turn this. Slide it right in. This one slides right in.
Everything is nice and secured. You want to make sure the speaker wire is going through this slot, and not over here, otherwise it could get a pinch coming across there. To install this, you're going to notice you have a hooky-do right here towards the front area, and then you have your clips right here that are going to latch right there. That being said, come in high and put in the front area first with the hooky-do. And then right here, give it a nice push. Couple loving bonks. Perfect.
Now, it's going to be time to test our work. So, you want to make sure you have the key in the on position. The vehicle does not have to be running. Let's go ahead and try to put this window down, and then back up. Battery is a little low in this vehicle. Perfect. Passenger side. Oh yeah. Let's go ahead and test the mirror. Right side. Yeah, awesome.
