Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Part Details
TRQ side mirrors and mirror components are designed to match the function, fixture, and performance of the original version for easy installation. TRQ mirrors are DOT certified, comply with all federal safety standards, and are independently lab tested to ensure our products comply with all government regulations. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
Exact fit - To obtain proper fit and function confirm your vehicle has the exact mirror options listed.
Paint To Match Note:
"Paint-to-match finish" refers to a smooth, paintable surface. This item is not painted. Paint offers better coverage and adhesion, but it is not necessary for installation.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet.
Hi, I'm Mike Greene. I'm one of the owners of 1AAuto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20+ years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed, correctly, that's going to save you time and money. Thank you and enjoy the video
In this video we'll be replacing the side view mirror on this 2001 S-10 Pickup. The procedure is pretty much the same as any '98 to '04 S-10 pickup, S-15 Jimmy, Blazer. Tools needed; window crank removal tool, if you have manual windows, Phillips screwdriver, door panel clip removal tool, putty knife or medium regular screwdriver, 7 mm socket and driver and a 10 mm socket and driver.
The hardest part about this, really is removing the door panel. You have to do that to do the mirror. What we're going to do here is, I'm going to fast forward through the door panel removal. If you want to see this procedure in real time, just go to our channel and do a search for S-10 door panel and you can see this in more detail, or you'll probably pick up enough from the fast motion to understand how to remove the door panel, but it's basically three screws. The Philips one by the door handle there and then these two 7 mm screws and then the next part you want to be careful with. Actually there's my Jerry-rigged way of removing that crank. Back of the door panel, those are all the pins you have to remove. You can't just yank the door panel, you'll end up breaking the plastic or the door panel so you want to find them with your putty knife and then use your screwdriver to pry them off. Then once you have those pins all out then the door panel just lifts up and off.
Get the door panel off, get to the mirror and pull these little insulators off, and then it is 13 mm bolts, I believe. Oh, smaller, 10 mm. Three 10 mm nuts and if you have power mirror, I believe, the harness will come down and probably connect into your power lock and power window panel. I'm going to put my hand down here to catch the nut in case it falls off.
We'll remove these three. I'm going to remove this last one. Shift around here. Make sure that the mirror doesn't fall off. I'm going to hold it onto the truck with my body a little bit. Remove the nut, then there's the mirror. Again, if you have power mirror, the harness would probably just be running down here, and connect in here somewhere. You wouldn't want to disconnect the harness before you took the mirror off and obviously to put the new one back on ... Possibly the most frustrating part of anything like this is if you happen to drop one of these nuts. Back down here. Put my hand in so I can feel. Then I'll tighten them up. Not too tight, just kind of twist them with my arm a little bit, not going crazy. The mirror bases are plastic so you can't crank them real tight. Don't forget to put our insulators back in. This cuts down on road noise, things like that.
You got your mirror replaced and now, again, just kind of fast forward through putting the door panel back on. Clip it up and over the window seal there, get all the clips lined up and into their holes and then once they're all lined up you can just use your palm and press all the clips in. Again, if you want to see this in more detail, just do a search on our channel on the 1AAuto channel for S-10 door panel and that'll show you a real time version. Obviously the big difference is this is on a manual window truck, the only difference would be if you have power windows, as you remove the door panel you want to unplug your accessories and before you put the door panel on you want to plug them back in. Once the door panel is on you're pretty much done.
We hope this helps you out, brought to you by www.1AAuto.com. Your choice for quality replacement parts and the best service on the internet. Please feel free to call us toll free 888-844-3393. We're the company that serves you on the internet and in person.
Tools used
