Replaces
Frequently bought together
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Quality Tested - built to a strict level of product standards.
Item Condition:
New
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years! We're dedicated to delivering quality auto parts, expert customer service, and fast and free shipping, all backed by our 100% satisfaction guarantee. So visit us at 1AAuto.com, your trusted source for quality auto parts.
In this video, we're going to be working with our 2008 Chevy Equinox 3.4-liter V6. We're going to show you how to remove and replace your engine's MAP sensor, or manifold absolute pressure sensor, which senses the air pressure inside of your intake manifold after the throttle body. If you like this video, please click subscribe. We have a ton more information on this vehicle as well as many other makes and models, and if you need this part for your car, you can follow the link down in the description over to 1aauto.com.
Here are the items you'll need for this repair: straight pick, 10mm, socket, ratchet
Remove the oil fill cap. Grab the bottom portion of the fill tube here, turn that counter-clockwise as well. Remove that. The connector on top of your EGR valve is also going to be in the way of removing your engine cover. There's a little plastic tab in here. These are really prone to breaking, so I like to push down on that tab with a pick and just remove the safety from the connector completely so we don't risk breaking it and having it be less secure when we re-install. Push down on the tab. Remove the electrical connector from your EGR. Simply pop up and remove your engine cover.
Your MAP sensor is located here at the back of the intake manifold just before your ignition coil. To remove it, we'll lift up on the connector and remove it from the sensor. Using a 10 millimeter socket and ratchet, we'll remove the bolt for the MAP sensor hold down. Remove the hold down as well. Carefully wiggle the MAP sensor out of the intake.
Install your new MAP sensor, the cover, and your 10 millimeter bolt. Tighten that down. Re-connect the sensor.
Reinstall the engine cover. These bushings sit on top of these two pegs here. Snap both of those into place. Reinstall the oil fill tube as well as the cap. Reconnect the electrical connector for the EGR. Again, I remove these safety slips. Pop that back in if you did the same thing.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Tools used
Tools used
Tools used
