|
|
Welcome Message from 1A Auto
|
 |
This driveshaft center support bearing assembly is a new aftermarket replacement part. It is usually used to support one section of a 2 piece driveshaft system.
Features:
- Mounts on rear driveshaft
- Replaces dealer part numbers: 3568, 2908851, 3621457, 3632991, B9TZ 4840 A, B9TZ4840A, D4TA 4800 BA, D4TA4800BA, D4TJ 4800 BA, D4TJ4800BA, D4TZ 4800 A, D4TZ 4800 B, D4TZ4800A, D4TZ4800B, D5UZ
4800 A, D5UZ4800A, D8TZ 4800 A, D8TZ4800A, D9TZ 4800 A, D9TZ4800A, F2TA 4800 AA, F2TA4800AA, F2TZ 4800 A, F2TZ4800A, F5TZ 4800 A, F5TZ 4800 AA, F5TZ 4800 AB, F5TZ4800A, F5TZ4800AA, F5TZ4800AB, F81A
4800 A, F81A 4800 BA, F81A4800A, F81A4800BA, F81Z 4800 BA, F81Z 4800 CA, F81Z4800BA, F81Z4800CA
- Direct replacement
- 2 Bolt Flange
- Specifications:
- Bore: 1.378"
- Width: 6.624'
- Outer Diameter: 2"
- Inner Race Radius: 6.624
- Outer Race Radius: 2.28"
- Built to strict quality control standards
1 Year Warranty
This item is backed by a 1 Year Manufacturers Warranty. In the event this item should fail during intended use, we will replace the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.
This part replaces:
|
|
- 1965 Ford F100 Truck
- 1966 Ford F100 Truck
- 1967 Ford F100 Truck
- 1968 Ford F100 Truck
- 1969 Ford F100 Truck
- 1970 Ford F100 Truck
- 1971 Ford F100 Truck
- 1972 Ford F100 Truck
- 1973 Ford F100 Truck
- 1974 Ford F100 Truck
- 1975 Ford F100 Truck
- 1976 Ford F100 Truck
- 1977 Ford F100 Truck
- 1978 Ford F100 Truck
- 1979 Ford F100 Truck
- 1980 Ford F100 Truck
- 1981 Ford F100 Truck
- 1982 Ford F100 Truck
- 1983 Ford F100 Truck
|
|
|