Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Acrylonitrile, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the power lock switch on this 2005 Ford Excursion. It's the same part and similar process on these Excursions from 2002 to 2005. We show you on the driver's side, but the passenger's side has the similar procedure. The items you'll need are a new door lock switch from 1AAuto.com and a flat blade screwdriver.
Start off by prying up your switch panel and then sliding it forward. Push the tab on each of these harnesses and pull them free. Pry up the tabs on your door lock switch while applying pressure from the other side, and the switch will fall free.
On the left is the old switch; on the right is the new one from 1A Auto. You can see they're identical, and they'll fit exactly the same. Push your new door lock switch into place. Reconnect your harnesses. Push this back in tab end first, and then push down the front.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video we're going to show you how to replace the power door lock switch on this 2003 Mercury Mountaineer. We show you on the driver side, but he passenger side is a similar procedure. The items you'll need for this are a new power door lock switch from 1AAuto.com and a flat blade screwdriver.
Pry out on this panel behind the door handle. Then just slide it forward and off the door handle. Then lift up on the front of your switch panel and then slide it back. Then just push the tabs on these harnesses to disconnect them. For this last one you're going to need a flat blade screwdriver to just push in the tab. Go ahead and pull it free.
Pry out on these tabs while pushing on the side of the switch and then repeat the process on this side. When you're doing the last tab, just lightly pull up on the switch and it'll pull free. Now to remove the door lock switch you want to pry out on these two tabs while applying pressure to the top of the switch. Just pry it out with a flat blade screwdriver, and the switch will pop free.
On the top is the old switch. On the bottom is the new one from 1A Auto. You can see they're identical. It fits exactly the same. Just push it into place until it clicks in. Then take your switch pack and just push that back into place.
Then reconnect those three harnesses. Then slide the back in first and push the front of the switch panel down into place. Then take this lower panel and slide it back over the door handle and slide those tabs back into place. Then push in the front. You're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
