|
|
Welcome Message from 1A Auto
|
 |
These replacement suspension parts are just what you need to ensure the safety and integrity of your vehicle's suspension and steering.
Specifications:
- Suspension/Steering Kit includes:
- (2) - FRONT UPPER Ball Joints - LH (Driver Side) & RH (Passenger Side)
- (2) - FRONT LOWER Ball Joints - LH (Driver Side) & RH (Passenger Side)
- (2) - FRONT INNER Tie Rod Ends - LH (Driver Side) & RH (Passenger Side)
- (2) - FRONT OUTER Tie Rod Ends - LH (Driver Side) & RH (Passenger Side)
- (2) - FRONT UPPER Control Arm Bushing Kit - LH (Driver Side) & RH (Passenger Side)
- (2) - FRONT Tie Rod Adjusting Sleeves - LH (Driver Side) & RH (Passenger Side)
- (2) - FRONT Sway Bar End Links - LH (Driver Side) & RH (Passenger Side)
- (2) - FRONT Sway Bar Bushing Kit - LH (Driver Side) & RH (Passenger Side)
- (1) - FRONT Steering Pitman Arm
- (1) - FRONT Steering Idler Arm
- Replaces dealer part numbers: F3AZ-3A131-A, 2W7Z-3A131-AA, 2W7Z-3A130-A, F5AZ-3A130-A, F5AZ-3310-A, F7AZ-3310-AA, F5AZ-3049-A, F6AZ-3049-AA, F7AZ-3049-AA, 2W7Z-3050-AA, F4ZZ-3050-A, F5AZ-3078-A,
F5AZ-3079-A, F8AZ-3050-AA, F8AC-3B438-AB, F8AZ-5K484-A, YW7Z-5493-AA, F5AC-3068-BA, D9AZ-3355-A, E9AZ-3355-A, F8AZ-3590-AA, F3AZ3A131A, 2W7Z3A131AA, 2W7Z3A130A, F5AZ3A130A, F5AZ3310A, F7AZ3310AA,
F5AZ3049A, F6AZ3049AA, F7AZ3049AA, 2W7Z3050AA, F4ZZ3050A, F5AZ3078A, F5AZ3079A, F8AZ3050AA, F8AC3B438AB, F8AZ5K484A, YW7Z5493AA, F5AC3068BA, D9AZ3355A, E9AZ3355A, F8AZ3590AA
- Direct replacements
- Built to strict quality control standards
Worn ball joints can cause excessive front tire wear, popping or creaking in the front end, extra play in the steering system, and pose a serious safety concern. Replace loose or worn ball joints
with our quality replacement. One way to diagnose a loose, or warn ball joint, is to jack the car up, so the wheel is off of the ground, then have someone try to move the wheel in and out. While
they are moving the wheel check the ball joint for play, if it is moving you probably need to replace it.
Remember whenever you are replacing any front end or steering components you should have your vehicle professionally aligned as soon as possible. This will ensure proper tracking and even tire wear.
|
|
- 1998 Ford Crown Victoria
- 1999 Ford Crown Victoria
- 2000 Ford Crown Victoria
- 2001 Ford Crown Victoria
- 2002 Ford Crown Victoria
|
|
|