U.S. Toll-Free Call Center   Hours
888-844-3393
Espanol: 866-401-3393


Highest Ratings

Quality: We've got the awards to prove it!

We've won the Bizrate Circle of Excellence award,
7 years in a row. Rated outstanding for quality, satisfaction, service, and on time delivery. 1A Auto selects the highest quality parts from the best manufacturers. Check our excellent ratings.
Fastest Shipping
No-Hassle Returns
USA Support Techs
Best Value
Our Guarantee

Customer Feedback


I was searching E-Bay 4 weathe...
Chevy S10 Blazer
Carl



Click here to try out our new site!
Home > Ford > Crown Victoria > Steering and Suspension Parts > 1995-1997 Ford Crown Victoria Suspension Kit

1995 - 1997 Ford Crown Victoria Suspension Kit
 
  Send to a friend    
    
  Product views

1995 - 1997 Ford Crown Victoria Suspension Kit


1ASFK00463
 
Temporarily Out of Stock. Click the Notify Me button below to be notified when it is available.



SAVE
66%
List Price:$424.57

Our Price: $142.95
 (You Save $281.62)

Free Ground Shipping
Part Number: 1ASFK00463
Quantity:
Notify Me
  
 




Welcome Message from 1A Auto


These replacement suspension parts are just what you need to ensure the safety and integrity of your vehicle's suspension and steering.

Specifications:

  • Suspension/Steering Kit includes:
    • (2) - FRONT UPPER Ball Joints - LH (Driver Side) & RH (Passenger Side)
    • (2) - FRONT LOWER Ball Joints - LH (Driver Side) & RH (Passenger Side)
    • (2) - FRONT INNER Tie Rod Ends - LH (Driver Side) & RH (Passenger Side)
    • (2) - FRONT OUTER Tie Rod Ends - LH (Driver Side) & RH (Passenger Side)
    • (2) - FRONT Tie Rod Adjusting Sleeves - LH (Driver Side) & RH (Passenger Side)
    • (2) - FRONT Sway Bar End Links - LH (Driver Side) & RH (Passenger Side)
    • (2) - REAR Sway Bar End Links - LH (Driver Side) & RH (Passenger Side)
    • (1) - Steering Pitman Arm
    • (1) - Steering Idler Arm
  • Direct replacements
  • Built to strict quality control standards

Worn ball joints can cause excessive front tire wear, popping or creaking in the front end, extra play in the steering system, and pose a serious safety concern. Replace loose or worn ball joints with our quality replacement. One way to diagnose a loose, or warn ball joint, is to jack the car up, so the wheel is off of the ground, then have someone try to move the wheel in and out. While they are moving the wheel check the ball joint for play, if it is moving you probably need to replace it.

Remember whenever you are replacing any front end or steering components you should have your vehicle professionally aligned as soon as possible. This will ensure proper tracking and even tire wear.


See 1A Auto on Facebook Watch our auto parts installation videos on Youtube Nutts and Bolts Blog Google Plus
Free Shipping