1995 - 2001 BMW 740iL 26 Piece Suspension Kit

These replacement suspension parts are just what you need to ensure the safety and integrity of your vehicle's suspension and steering.

Specifications:

• Suspension Kit includes:
  • (2) - FRONT LOWER REARWARD Control Arms - LH (Driver Side) & RH (Passenger Side)
  • (2) - FRONT LOWER FORWARD Control Arms - LH (Driver Side) & RH (Passenger Side)
  • (2) - FRONT UPPER Control Arms - LH (Driver Side) & RH (Passenger Side)
  • (2) - FRONT OUTER Tie Rod Assemblies - LH (Driver Side) & RH (Passenger Side)
  • (2) - FRONT Sway Bar End Links - LH (Driver Side) & RH (Passenger Side)
  • (2) - FRONT Engine Mounts - LH (Driver Side) & RH (Passenger Side)
  • (2) - REAR Strut Dust Sleeves & Bumper Stops - LH (Driver Side) & RH (Passenger Side)
  • (2) - REAR UPPER REARWARD Control Arms - LH (Driver Side) & RH (Passenger Side)
  • (2) - REAR Ball Joints - LH (Driver Side) & RH (Passenger Side)
  • (2) - REAR UPPER Strut Mounts - LH (Driver Side) & RH (Passenger Side)
  • (2) - REAR Integral Links - LH (Driver Side) & RH (Passenger Side)
  • (1) - CENTER Steering Tie Rod Assembly (Drag Link)
  • (1) - FRONT Steering Idler Arm
• Replaces dealer part numbers: 22 11 1 092 823, 22 11 1 092 824, 31 12 1 141 721, 31 12 1 141 722, 31 12 1 142 087, 31 12 1 142 088, 31 33 1 090 611, 31 33 1 124 449, 31 33 1 137 932, 31 35 1 091 496, 31 35 1 095 695, 32 21 1 096 057, 32 21 1 141 345, 33 32 1 090 745, 33 32 1 090 030, 32 21 1 141 346, 32 21 1 141 592, 33 32 1 090 905, 33 32 1 090 906, 33 32 1 095 631, 33 32 1 091 687, 33 32 1 097 264, 33 32 6 767 748, 33 32 6 768 791, 33 32 6 770 749, 33 32 6 770 059, 33 32 6 770 060, 22111092823, 22111092824, 31121141721, 31121141722, 31121142087, 31121142088, 31331090611, 31331124449, 31331137932, 31351091496, 31351095695, 32211096057, 32211141345, 33321090745, 33321090030, 32211141346, 32211141592, 33321090905, 33321090906, 33321095631, 33321091687, 33321097264, 33326767748, 33326768791, 33326770749, 33326770059, 33326770060
• Direct replacements
• Built to strict quality control standards

Worn ball joints can cause excessive front tire wear, popping or creaking in the front end, extra play in the steering system, and pose a serious safety concern. Replace loose or worn ball joints with our quality replacement. One way to diagnose a loose, or warn ball joint, is to jack the car up, so the wheel is off of the ground, then have someone try to move the wheel in and out. While they are moving the wheel check the ball joint for play, if it is moving you probably need to replace it.

Remember whenever you are replacing any front end or steering components you should have your vehicle professionally aligned as soon as possible. This will ensure proper tracking and even tire wear.