Replaces

1999-2009 Ford Crown Victoria Red Outer Tail Light with Black Bezel Driver Side

Part Details

  • Location: Driver Side

This part replaces:

  • OE # YW7Z13405AA
  • HOLLANDER 166-01905AL
  • PARTSLINK FO2800160

  • New

This replacement Ford Crown Victoria Tail light is just what you need to get your Ford in good looking form again!

Specifications:

  • LH (Driver Side)
    • Quarter (1/4) panel mounted
  • Replaces dealer part number: YW7Z-13405-AA, YW7Z13405AA
  • 2 bulb design
  • All red design with black trim
  • Can be used on Sport & Police models, but will need to have holes drilled for repeater lights if flashers are installed
  • Injection molded plastic
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement
  • Does not include bulbs or wiring

We have noticed that there are many inferior quality Tail lights on the market. We have researched other Tail light manufacturers and are only selling what we believe to be the highest quality, best fitting, aftermarket Tail lights available. So don't be fooled by cheaper made imitation Tail lights. Go with superior quality!

This Ford Crown Victoria taillamp is a great replacement and has good cost savings over a taillamp from the dealer.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. Removing the Taillight Assembly
    • Twist off the plastic clip behind the taillight.
    • Pull the side insulation panel off.
    • Pull the insulation panel behind the taillight back.
    • Remove the three 11mm nuts on the back of the taillight.
    • Pull the taillight forward.
  2. Replacing a Bulb
    • Twist out the socket.
    • Pull the bulbs straight out.
    • Push the new bulb into place.
    • Twist the socket back into place.
  3. Replacing the Taillight Assembly
    • Twist the sockets into the new taillight assembly.
    • Line up the taillight and push it into place.
    • Replace the three 11mm nuts.
    • Put the insulation panel back into place.
    • Twist the plastic clip back into place.

How-to Video:

(03:56 min)

Tools List:

    Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 11mm Socket



This part replaces:

  • OE # YW7Z13405AA
  • HOLLANDER 166-01905AL
  • PARTSLINK FO2800160

Vehicle Fit

  • 1999-2009 Ford Crown Victoria Red Outer Tail Light with Black Bezel Driver Side
$38.10
Save 78%
List: $177.00 Save: $138.90
Part #: 1ALTL00431

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est