Replaces

1999-04 Jeep Grand Cherokee Wheel Bearing & Hub Assembly - 1ASHF00040

This part replaces:

  • OE # 52098679AB, 52098679AD
  • HOLLANDER 538-01499

  • New

Specifications:

  • Fits the LH (Driver Side) & RH (Passenger Side) FRONT
  • 3 bolt flange
  • Direct replacement
  • Replaces dealer part numbers: 52098679AB, 52098679AD
  • Fits 5 Lug Wheel
  • Studs already installed
  • Built to strict quality control standards

 

Quality

  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both Bizrate.com and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto wheel hub & bearings are all tested prior to shipping.

Fit Guaranteed

  • This hub & bearing will install just as your original does. You can use your existing hardware.
  • Save time and money with this direct fit hub bearing assembly. No trips to the auto parts store or extra time trying to match up and press bearings.
  • Hub installation is a degree more difficult than changing a tire on most vehicles.

Value

  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.

2 Year Warranty

This item is backed by a 2 Year Warranty. In the event this item should fail during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Install the new hub (0:30 in the video)
    • Use a wire brush to clean up the steering knuckle
    • Install the hub and hand thread on the bolts.
    • Torque the bolts to 65 ft lbs, rotating between the bolts, tightening a little bit around and around so the hub goes in evenly.
    • Put the hub nut and washer in, tighten but do not torque all the way just yet.
  2. Assemble the brake (3:20 in the video)
    • Put the rotor back on on, putting a lug nut on just to keep it from jumping around on you while you put the caliper back together.
    • Bolt the caliper bracket back on.
    • Install the brake pads, using a little anti-seize grease on the mounting edges.
    • Compress the caliper with a C-clamp and install it onto the bracket and bolt it in.
    • Torque the hub nut to 175.
    • Have someone in the car put the car in four wheel drive and in gear and hold down the brakes while you do this.
    • Install the hub washer, retainer and cotter pin.
  3. Put your wheel back on. (7:20 in the video)
    • Put the wheel on and use a star pattern to hand tighten the lug nuts.
    • Lower the vehicle and torque the lug nuts in a star pattern to 100 ft lbs.
    • Pump the brakes a few times to re-compress the caliper pistons.

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Brake Parts Cleaner

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench
  • Slip-Joint Pliers

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - SAE

  • 11/16 Inch Socket
  • 3/4 Inch Socket

  • Specialty Tools

  • A Piece of Pipe (for leverage)
  • Floor Jack
  • Hammer
  • Jack Stands
  • Large C-Clamp
  • Sledge Hammer
  • Wire Brush

How-to Video:

(08:17 min)

Tools List:

    Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Brake Parts Cleaner

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench
  • Slip-Joint Pliers

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - SAE

  • 11/16 Inch Socket
  • 3/4 Inch Socket

  • Specialty Tools

  • A Piece of Pipe (for leverage)
  • Floor Jack
  • Hammer
  • Jack Stands
  • Large C-Clamp
  • Sledge Hammer
  • Wire Brush



This part replaces:

  • OE # 52098679AB, 52098679AD
  • HOLLANDER 538-01499

Vehicle Fit

  • 1999-2004 Jeep Grand Cherokee Wheel Bearing & Hub Assembly Front
$55.45
Save 79%
List: $264.00 Save: $208.55
Part #: 1ASHF00040

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est