Replaces

1999-2004 Honda Odyssey Front Lower Control Arm with Ball Joint Driver Side

Part Details

  • Location: Driver Side

This part replaces:

  • HOLLANDER 512-58464L
  • DORMAN 521-351
  • OE # 51360S0XA02

  • New

This replacement front lower control arm is just what you need to bring back the safety and integrity of your vehicle's suspension and steering.

Specifications:

  • LH (Driver Side) FRONT LOWER
  • Replaces dealer part numbers: 51360S0XA02, 51360 S0X A02
  • Complete assembly
    • Includes ball joint & bushings
  • Direct replacement
  • Built to strict quality control standards

Worn ball joints can cause excessive front tire wear, popping or creaking in the front end, extra play in the steering system, and pose a serious safety concern. Replace loose or worn ball joints with our quality replacement.

One way to diagnose a loose, or warn ball joint, is to jack the car up, so the wheel is off of the ground, then have someone try to move the wheel in and out. While they are moving the wheel check the ball joint for play, if it is moving you probably need to replace it.

Remember whenever you are replacing any front end or steering components you should have your vehicle professionally aligned as soon as possible. This will ensure proper tracking and even tire wear.

Lifetime Warranty

Effective June 23, 2014: This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Separating the Control Arm from the Knuckle
    • Loosen the lug nuts.
    • Lift the car, and remove the lug nuts the rest of the way.
    • Using pliers and a pick remove the ball joint pin.
    • Spray penetrating oil on the ball joint nut.
    • Using a wrench remove the ball joint nut.
    • Put the nut back on partially.
    • Use a ball joint fork and separate the ball joint from the lower control arm.
    • Remove the nut.
    • Pry the lower control arm out of the knuckle.
  2. Removing the Control Arm
    • Spray the bolts on the control arm with penetrating oil.
    • Remove the two bolts from the control arm.
    • Pull the control arm down and out.
  3. Replacing the Control Arm
    • Replace the rear bolt partially.
    • Rotate the control arm into place and push the ball joint into the knuckle.
    • Pry the control arm up to align the holes and replace the bolt.
    • Replace the ball joint nut.
    • Replace the pin.
    • Jack up the ball joint end of the control arm until all the support is on the suspension.
    • Torque the control arm bolts to 90 – 95ft/lbs.
    • Lower the control arm jack.
    • Put the wheel in place and replace the lug nuts.
    • Lower the vehicle and torque the lug nuts to 95 – 100ft/lbs. in a crossing pattern.

How-to Video:

(08:33 min)

Tools List:

    Materials, Fluids, and Supplies

  • Penetrating Oil

  • Ratchets & Related

  • Breaker Bar
  • Ratchet

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 19mm Socket

  • Specialty Tools

  • A Piece of Pipe (for leverage)
  • Hammer
  • Jack Stands
  • Pick
  • Pickle Fork

  • Wrenches - Metric

  • 17mm Wrench
  • 18mm Wrench



This part replaces:

  • HOLLANDER 512-58464L
  • DORMAN 521-351
  • OE # 51360S0XA02

Vehicle Fit

  • 1999-2004 Honda Odyssey Front Lower Control Arm with Ball Joint Driver Side
$95.45
Save 64%
List: $266.90 Save: $171.45
Part #: 1ASLF00353

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est