Replaces

1999-2002 Plymouth Prowler Rear Wheel Bearing & Hub Assembly

Part Details

  • Location: Rear

  • New

This replacement wheel bearing & hub assembly is just what you need to get your vehicle in good working order again.

Specifications:

  • Fits either LH (Driver Side) or RH (Passenger Side) REAR
  • Replaces dealer part number: 4593450AA
  • 3 Bolt Flange
  • Fits 5 Lug Wheels
  • Direct replacement
  • Built to strict quality control standards
This wheel bearing & hub assembly is a great replacement and has good cost savings over a unit from the dealer.
Quality
  • 1A Auto exclusive 2 Year Warranty.
    • If this bearing should fail to provide satisfactory performance you may exchange it.
  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both Bizrate.com and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto bearings are all tested prior to shipping.
Fit Guaranteed
  • This hub bearing will install just as your original does. You can use your existing hub & hardware.
  • We also have plenty of installation videos to help you get the job done right the first time.

Value
  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.

 

2 Year Warranty

This item is backed by a 2 Year Warranty. In the event this item should fail during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Remove the wheel (1:10 in the video)
    • Loosen the lug nuts
    • Raise and secure the vehicle
    • Remove the lug nuts and the wheel.
  2. Remove the brakes (1:35 in the video)
    • Turn the wheel to better access the caliper
    • Use a flat blade screwdriver to compress the caliper piston
    • Remove the two 10 mm bolts to remove the caliper.
    • Fasten the caliper up with wire ties out of the way
    • Remove the rotor, hammering it off if its rusted onto the hub.
  3. Remove the hub (3:10 in the video)
    • Remove the hub nut with a 34 mm socket and impact wrench.
    • If you don’t have an impact wrench, put the wheel and lug nuts back on and lower the car and use a breaker bar.
    • Unbolt the three 18 mm hub bolts.
    • Take caution not to damage the CV boot.
    • Break the hub loose with a hammer and remove it.
  4. Install the new hub (5:55 in the video)
    • Place the hub onto the steering knuckle and work the axle into place.
    • Bolt the three 18 mm bolts into place.
    • Torque them to 90 ft lbs, rotating so they get torqued evenly.
    • Replace the hub nut, but do not tighten all the way.
  5. Reassemble the brakes (8:45 in the video)
    • Put the rotor on and put a lug nut on just to keep it from running away on you while you put the caliper back on
    • Put the pads into the caliper and compress the piston with a c-clamp
    • Bolt the 10 mm caliper bolts back in
    • Put the wheel back on and hand tighten the lug nuts
    • Torque the hub nut to 105 ft lbs
    • Torque the lug nuts to 90-100 ft lbs using a star pattern.
    • Pump the brakes a few times to recompress the caliper pistons and do a few 5-10 mph stops in the driveway before road testing.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 10mm Socket
  • 18mm Socket
  • 19mm Socket
  • 34mm Socket

  • Specialty Tools

  • Large C-Clamp
  • Large Hammer

  • Wrenches - Metric

  • 10mm Wrench
  • 18mm Wrench
  • 19mm Wrench

How-to Video:

(13:19 min)

Tools List:

    Ratchets & Related

  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 10mm Socket
  • 18mm Socket
  • 19mm Socket
  • 34mm Socket

  • Specialty Tools

  • Large C-Clamp
  • Large Hammer

  • Wrenches - Metric

  • 10mm Wrench
  • 18mm Wrench
  • 19mm Wrench




Vehicle Fit

  • 1999-2002 Plymouth Prowler Rear Wheel Bearing & Hub Assembly
$34.95
Save 83%
List: $202.00 Save: $167.05
Part #: 1ASHX00022

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est