Replaces

1998-2004 Dodge Intrepid Tail Light Driver Side

Part Details

  • Location: Driver Side

This part replaces:

  • HOLLANDER 166-01690L
  • PARTSLINK CH2800146
  • OE # 4574961AE J K L N

  • New

This replacement Tail light is just what you need to get your Dodge Intrepid in good looking form again!

Specifications:

  • LH (Driver Side)
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement
  • Built to strict quality control standards
  • Red, Amber, and White in color as original

We have noticed that there are many inferior quality Tail lights on the market. We have researched other tail light manufacturers and are only selling what we believe to be the highest quality, best fitting, aftermarket tail lights available. So don't be fooled by cheaper made imitation tail lights. Go with superior quality!

This light makes a great replacement and has good cost savings over a dealer unit.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. Removing the Taillight Assembly (0:54 in the video)
    • Pry out the pins along the trunk insulation.
    • Pull the insulation back.
    • Remove the three thumb screws from the back of the taillight.
    • Pull the taillight assembly straight out.
    • Press the tab on the connector and disconnect the taillight assembly.
  2. Replacing a Bulb (2:02 in the video)
    • Twist the socket counterclockwise.
    • Pull the bulb straight out.
    • Push the new bulb into place.
    • Twist the socket clockwise to lock it back into place.
  3. Replacing the Taillight Assembly (2:29 in the video)
    • Twist out all of the sockets from the old taillight and twist them into the new taillight.
    • Reconnect the harness.
    • Line up the taillight and push it into place.
    • Replace the three thumb screws.
    • Replace the insulation.
    • Reinsert the pins into the insulation.

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver

How-to Video:

(03:55 min)

Tools List:

    Screwdrivers & Related

  • Flat Blade Screwdriver



This part replaces:

  • HOLLANDER 166-01690L
  • PARTSLINK CH2800146
  • OE # 4574961AE J K L N

Vehicle Fit

  • 1998-2004 Dodge Intrepid Tail Light Driver Side
$79.95
Save 60%
List: $202.00 Save: $122.05
Part #: 1ALTL00415

Out of Stock

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est