Replaces

1998-2002 Ford Crown Victoria 14 Piece Set Steering & Suspension Kit with (2) Front Upper Ball Joints (2) Front Lower Ball Joints (2) Front Inner Tie Rods (2) Front Outer Tie Rods (2) Tie Rod Adjusting Sleeves (2) Front Sway Bar Links (1) Idler Arm & (1) Pitman Arm

Part Details

  • Kit Includes: (2) Tie Rod Adjusting Sleeves
  • Kit Includes: (2) Front Lower Ball Joints
  • Kit Includes: (1) Pitman Arm
  • Kit Includes: (2) Front Outer Tie Rods
  • Kit Includes: (2) Front Sway Bar Links
  • Quantity: 14 Piece Set
  • Kit Includes: (2) Front Upper Ball Joints
  • Kit Includes: (1) Idler Arm
  • Kit Includes: (2) Front Inner Tie Rods

  • New

Specifications:

  • Brand New Suspension & Steering Kit
  • Comes as a 14 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Remove the wheel (1:16)
    • Loosen the lug nuts with a lug wrench or 19 mm socket and ratchet.
    • Raise and secure the vehicle.
    • Remove the lug nuts and wheel.
  2. Remove the cams (1:33)
    • Secure the frame of the vehicle.
    • Jack up the control arm/suspension of the car.
    • Mark your inner and outer cams to help align your vehicle during assembly.
    • Remove the 22 mm bolts and remove the inner and outer cams.
  3. Remove the upper ball joint (3:35)
    • Remove the 18 mm nut and remove bolt.
    • Remove the upper ball joint.
  4. Install the new upper ball joint. (4:10)
    • Fit the ball joint into the steering knuckle and over the control arm studs.
    • Work the upper ball joint into place.
    • Bolt down with the 18 mm ball joint locking nut.
    • Put your cams down on the control arm studs and thread on the locking nuts.
    • Line up your marks on the cams and tighten down the lock nuts the rest of the way.
    • Tighten up the pinch bolt to 90 ft lbs.
    • Torque the control arm nuts to 118 ft lbs.
    • Insert your grease fitting and fill with the grease gun.
  5. put your wheel back on (7:51)
    • Hand tighten your lug nuts
    • Lower the suspension and the vehicle.
    • Torque your lug nuts in a star pattern to 100-110 ft lbs.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Marker / Writing Utensil

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench
  • Adjustable Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 22mm Socket
  • 18mm Socket
  • 21mm Socket
  • 19mm Socket
  • 20mm Socket

  • Specialty Tools

  • Grease Gun

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Are all of these fittings greasable such as the one in the video? (At least the applicable fittings)
KingZoo on Nov 13, 2015
BEST ANSWER: Hello and thank you for your inquiry. These will come as sealed units. All of these will come with a lifetime warranty, that covers all manufactures defects. Thank you and have a great day!

How-to Video:

(08:44 min)

Tools List:

    General Tools

  • Floor Jack
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Marker / Writing Utensil

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench
  • Adjustable Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 22mm Socket
  • 18mm Socket
  • 21mm Socket
  • 19mm Socket
  • 20mm Socket

  • Specialty Tools

  • Grease Gun




Vehicle Fit

  • 1998-2002 Ford Crown Victoria 14 Piece Set Steering & Suspension Kit with (2) Front Upper Ball Joints (2) Front Lower Ball Joints (2) Front Inner Tie Rods (2) Front Outer Tie Rods (2) Tie Rod Adjusting Sleeves (2) Front Sway Bar Links (1) Idler Arm & (1) Pitman Arm
  • 1998-2002 Lincoln Town Car 14 Piece Set Steering & Suspension Kit with (2) Front Upper Ball Joints (2) Front Lower Ball Joints (2) Front Inner Tie Rods (2) Front Outer Tie Rods (2) Tie Rod Adjusting Sleeves (2) Front Sway Bar Links (1) Idler Arm & (1) Pitman Arm
  • 1998-2002 Mercury Grand Marquis 14 Piece Set Steering & Suspension Kit with (2) Front Upper Ball Joints (2) Front Lower Ball Joints (2) Front Inner Tie Rods (2) Front Outer Tie Rods (2) Tie Rod Adjusting Sleeves (2) Front Sway Bar Links (1) Idler Arm & (1) Pitman Arm
$ 126.95
Save 69%
List: $406.23 Save: $279.28
Part #: 1ASFK00745

Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY M-F
For Orders Placed By 5pm Est